[U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT

[Peng Fan <b51431@freescale.com>]

Hi Fabio,

On Tue, Sep 08, 2015 at 02:43:11PM -0300, Fabio Estevam wrote:
>If the SD card does not contain the u-boot.img then we get the
>following error:
>
>U-Boot SPL 2015.10-rc2-23947-g7ad5930 (Sep 08 2015 - 14:10:29)                  
>** Partition 1 not valid on device 0 **                                         
>spl_register_fat_device: fat register err - -1                                  
>spl_load_image_fat: error reading image u-boot.img, err - -1    
>
>Remove CONFIG_SPL_FAT_SUPPORT and let CONFIG_SPL_MMC_SUPPORT do the
>job.
>
>Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
>---
> include/configs/mx6ul_14x14_evk.h | 1 -
> 1 file changed, 1 deletion(-)
>
>diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
>index 4a2280b..e785925 100644
>--- a/include/configs/mx6ul_14x14_evk.h
>+++ b/include/configs/mx6ul_14x14_evk.h
>@@ -17,7 +17,6 @@
> /* SPL options */
> #define CONFIG_SPL_LIBCOMMON_SUPPORT
> #define CONFIG_SPL_MMC_SUPPORT
>-#define CONFIG_SPL_FAT_SUPPORT

Can we keep this? Without this, we need to burn u-boot.img into sdcard, but
i prefer to load u-boot.img from the fat partition.

Regards,
Peng.

> #include "imx6_spl.h"
> 
> #define CONFIG_ROM_UNIFIED_SECTIONS
>-- 
>1.9.1
>

--