[U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds

[Lukasz Majewski <l.majewski@majess.pl>]

Hi Alexey,

> Hi Marek, Lukasz,
> 
> > On Wednesday, September 09, 2015 at 09:01:30 AM, Lukasz Majewski
> > wrote:
> > > Hi,
> > > 
> > > > The commit: d9dbb97be0e4a550457aec5f11afefb446169c90
> > > > "mmc: dw_mmc: Zap endless timeout" removed endless loop waiting
> > > > for end of dw mmc transfer.
> > > > 
> > > > For some workloads - dfu test @ Odroid XU3 (sending 8MiB file) -
> > > > and SD cards (e.g. MicroSD Kingston 4GiB, Adata 4GiB)
> > > > the default timeout is to short.
> > > > 
> > > > The new value - 20 seconds - takes into account the situation
> > > > when SD card triggers internal clean up. Such process may take
> > > > more than 10 seconds on some cards.
> > > > 
> > > > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> > > > Cc: Marek Vasut <marex@denx.de>
> > > > Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
> > > > Cc: Tom Rini <trini@konsulko.com>
> > > 
> > > Are there any more questions regarding this patch or is it ready
> > > for submission as fix for v2015.10?
> > 
> > No comments, just apply this.
> > 
> > But this should really be fixed properly in the next MW.
> > 
> > Best regards,
> > Marek Vasut
> 
> FWIW I faced similar problem even reading data.
> At least on one of my boards reading of ~8Mb file
> took ~1.7 seconds and so 1 second timeout was interrupting data
> exchange.

Was it SD card or eMMC device?

> 
> So indeed we need to have some dirty hack for upcoming release
> like bumping timeout to something really huge but later we
> need to fix that problem properly.
> 
> I though proper solution would be to set timeout depending of amount
> of data to be exchanged... something like take slowest speed of SD/MMC
> that is allowed by spec and calculate delay based on how much time it
> might take for that slow device and for safety multiply it by say 2.

As fair as I remember, card provide this kind of information. We can
try to investigate this possibility.

> 
> Now from this thread I see that there're other reasons that might
> affect length of at least write operation. In other words it could be
> complicated unfortunately.

My gut feeling is that proper handling of eMMC would require quite a
fair mmc subsystem rework.

> 
> Still we need to fix regression first with virtually infinite
> timeout :) I would even thing that simple revert of Marek's patch may
> make sense for now. 

+1 - unfortunately there were some other patches applied to this
particular patch. Simple revert might be a bit tricky here.

> From both points of view for keeping history
> clean (compared to stacked fixes/workarounds) and from removal of
> regression root cause.

As I said before - +1 from me.

> 
> It's not that I like to have infinite loops but given previous
> implementation worked fine for people in the previous U-Boot release.

Good justification


Best regards,
Lukasz Majewski

> 
> -Alexey
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150911/a6f13900/attachment.sig>