public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv3] arm: socfpga: Enable saveenv for SD/MMC
Date: Thu, 24 Sep 2015 19:51:07 +0200	[thread overview]
Message-ID: <201509241951.07430.marex@denx.de> (raw)
In-Reply-To: <20150924174746.GB18436@amd>

On Thursday, September 24, 2015 at 07:47:46 PM, Pavel Machek wrote:
> Hi!
> 
> > From: Dinh Nguyen <dinguyen@opensource.altera.com>
> > 
> > Enable the able to save the environment variables when SD/MMC is used.
> > 
> > Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> > ---
> > v3: Only define ENV_IS_NOWHERE if env is not in MMC, NAND, FAT, and
> > SPI_FLASH v2: Move this option to be on a per-board basis
> > 
> >     Add config for socfpga_cyclone5 and socfpga_arria5
> > 
> > ---
> > 
> >  include/configs/socfpga_arria5_socdk.h   | 4 ++++
> >  include/configs/socfpga_common.h         | 5 +++++
> >  include/configs/socfpga_cyclone5_socdk.h | 4 ++++
> >  include/configs/socfpga_de0_nano_soc.h   | 4 ++++
> >  include/configs/socfpga_sockit.h         | 4 ++++
> >  5 files changed, 21 insertions(+)
> > 
> > diff --git a/include/configs/socfpga_arria5_socdk.h
> > b/include/configs/socfpga_arria5_socdk.h index 3193684..b75b0a2 100644
> > --- a/include/configs/socfpga_arria5_socdk.h
> > +++ b/include/configs/socfpga_arria5_socdk.h
> > @@ -59,6 +59,10 @@
> > 
> >  #endif
> > 
> > +#define CONFIG_ENV_IS_IN_MMC
> > +#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
> > +#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
> > +
> > 
> >  /* USB */
> >  #ifdef CONFIG_CMD_USB
> >  #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
> > 
> > diff --git a/include/configs/socfpga_common.h
> > b/include/configs/socfpga_common.h index a2811ba..b3fba5b 100644
> > --- a/include/configs/socfpga_common.h
> > +++ b/include/configs/socfpga_common.h
> > @@ -281,7 +281,12 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> > 
> >  #define CONFIG_SYS_CONSOLE_IS_IN_ENV
> >  #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
> >  #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
> > 
> > +#if !defined CONFIG_ENV_IS_IN_MMC && \
> > +    !defined CONFIG_ENV_IS_IN_NAND && \
> > +    !defined CONFIG_ENV_IS_IN_FAT && \
> > +    !defined CONFIG_ENV_IS_IN_SPI_FLASH
> > 
> >  #define CONFIG_ENV_IS_NOWHERE
> > 
> > +#endif
> > 
> >  #define CONFIG_ENV_SIZE			4096
> 
> Actually... if we decided that position of u-boot environment is
> board-specific, size should be board-specific, too.
> 
> But it might be better to just define
> 
> #define ENV_IN_MMC_SECTOR_1
> 
> in each board, and have the common code in socfpga_common.h... so that
> we can change environment size for all boards using "after mmc"
> layout, for example.
> 
> Ouch and 4K is way too small.

Patch is welcome :-)

      reply	other threads:[~2015-09-24 17:51 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-23 19:21 [U-Boot] [PATCHv3] arm: socfpga: Enable saveenv for SD/MMC dinguyen at opensource.altera.com
2015-09-23 19:37 ` Marek Vasut
2015-09-24 17:47 ` Pavel Machek
2015-09-24 17:51   ` Marek Vasut [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201509241951.07430.marex@denx.de \
    --to=marex@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox