[U-Boot] [PATCH v2] nios2: convert copy_exception_trampoline to use dm cpu data

[Marek Vasut <marex@denx.de>]

On Tuesday, October 06, 2015 at 08:55:36 AM, Thomas Chou wrote:
> Convert copy_exception_trampoline() to use dm cpu data.
> 
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
> ---
> v2
>   fix exception address references.
> 
>  arch/nios2/cpu/cpu.c   | 24 ++++++++++++++++++++++++
>  arch/nios2/cpu/start.S | 24 +-----------------------
>  2 files changed, 25 insertions(+), 23 deletions(-)
> 
> diff --git a/arch/nios2/cpu/cpu.c b/arch/nios2/cpu/cpu.c
> index 229a07b..5403c0d 100644
> --- a/arch/nios2/cpu/cpu.c
> +++ b/arch/nios2/cpu/cpu.c
> @@ -44,6 +44,27 @@ void dcache_disable(void)
>  	flush_dcache(CONFIG_SYS_DCACHE_SIZE, CONFIG_SYS_DCACHELINE_SIZE);
>  }
> 
> +/*
> + * COPY EXCEPTION TRAMPOLINE -- copy the tramp to the
> + * exception address. Define CONFIG_ROM_STUBS to prevent
> + * the copy (e.g. exception in flash or in other
> + * softare/firmware component).
> + */
> +#ifndef CONFIG_ROM_STUBS
> +static void copy_exception_trampoline(void)
> +{
> +	extern int _except_start, _except_end;
> +	void *except_target = (void *)gd->arch.exception_addr;
> +
> +	if (&_except_start != except_target) {
> +		memcpy(except_target, &_except_start,
> +		       &_except_end - &_except_start);
> +		flush_cache(gd->arch.exception_addr,
> +			    &_except_end - &_except_start);

Are you absolutelly sure that those addresses are aligned ?

> +	}
> +}
> +#endif
> +
>  int arch_cpu_init_dm(void)
>  {
>  	struct udevice *dev;
> @@ -56,6 +77,9 @@ int arch_cpu_init_dm(void)
>  		return -ENODEV;
> 
>  	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
> +#ifndef CONFIG_ROM_STUBS
> +	copy_exception_trampoline();
> +#endif
> 
>  	return 0;
>  }
> diff --git a/arch/nios2/cpu/start.S b/arch/nios2/cpu/start.S
> index 6c7c777..90e0310 100644
> --- a/arch/nios2/cpu/start.S
> +++ b/arch/nios2/cpu/start.S
> @@ -14,7 +14,7 @@
>   ************************************************************************/
> 
>  	.text
> -	.global _start
> +	.global _start, _except_start, _except_end
> 
>  _start:
>  	wrctl	status, r0		/* Disable interrupts */
> @@ -89,28 +89,6 @@ _cur:	movhi	r5, %hi(_cur - _start)
>  	jmp	r4
>  _reloc:
> 
> -	/* COPY EXCEPTION TRAMPOLINE -- copy the tramp to the
> -	 * exception address. Define CONFIG_ROM_STUBS to prevent
> -	 * the copy (e.g. exception in flash or in other
> -	 * softare/firmware component).
> -	 */
> -#if !defined(CONFIG_ROM_STUBS)
> -	movhi	r4, %hi(_except_start)
> -	ori	r4, r4, %lo(_except_start)
> -	movhi	r5, %hi(_except_end)
> -	ori	r5, r5, %lo(_except_end)
> -	movhi	r6, %hi(CONFIG_SYS_EXCEPTION_ADDR)
> -	ori	r6, r6, %lo(CONFIG_SYS_EXCEPTION_ADDR)
> -	beq	r4, r6, 7f	/* Skip if at proper addr */
> -
> -6:	ldwio	r7, 0(r4)
> -	stwio	r7, 0(r6)
> -	addi	r4, r4, 4
> -	addi	r6, r6, 4
> -	bne	r4, r5, 6b
> -7:
> -#endif
> -
>  	/* STACK INIT -- zero top two words for call back chain.
>  	 */
>  	movhi	sp, %hi(CONFIG_SYS_INIT_SP)