[U-Boot] [PATCH v4 2/5] spi: cadence_qspi: Fix fdt read of spi-max-frequency

[Marek Vasut <marex@denx.de>]

On Saturday, October 17, 2015 at 02:46:29 PM, Chin Liang See wrote:
> Hi Marek,

Hi!

> On Sat, 2015-10-17 at 01:08 +0200, marex at denx.de wrote:
> > On Friday, October 16, 2015 at 12:13:24 PM, Chin Liang See wrote:
> > > From 4a91b5a380e7d3178d4378df79224442c79278bb Mon Sep 17 00:00:00 2001
> > > From: Chin Liang See <clsee@altera.com>
> > > Date: Fri, 16 Oct 2015 16:35:10 +0800
> > > Subject: [PATCH v4 2/5] spi: cadence_qspi: Fix fdt read of
> > > spi-max-frequency
> > > 
> > > Fix the fdt read for spi-max-frequency as it's contained
> > > in the child node. Current state of code is always
> > > returning default value.
> > > 
> > > Signed-off-by: Chin Liang See <clsee@altera.com>
> > > Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> > > Cc: Dinh Nguyen <dinh.linux@gmail.com>
> > > Cc: Marek Vasut <marex@denx.de>
> > > Cc: Stefan Roese <sr@denx.de>
> > > Cc: Vikas Manocha <vikas.manocha@st.com>
> > > Cc: Jagannadh Teki <jteki@openedev.com>
> > > Cc: Pavel Machek <pavel@denx.de>
> > > Acked-by: Marek Vasut <marex@denx.de>
> > > Acked-by: Pavel Machek <pavel@denx.de>
> > > ---
> > > Changes for v4
> > > - use the newly created fdtdec_get_uint
> > 
> > This patch depends on 5/5, so this will break bisect . Please do
> > reorder the patches , most likely such that 5/5 goes in first and
> > the rest follows.
> 
> Sure, I can do the patches order re-shuffling.

Thanks! Ideally, I think you can even send those patches separatelly and
note that the QSPI series depends on the FDT patch.

Best regards,
Marek Vasut