[U-Boot] [PATCH v5 4/5] spi: cadence_qspi: Ensure check for max frequency in place

[U-Boot] [PATCH v5 4/5] spi: cadence_qspi: Ensure check for max frequency in place

[Chin Liang See]

Ensure the intended SCLK frequency not exceeding the maximum
frequency. If that happen, SCLK will set to maximum frequency.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Vikas Manocha <vikas.manocha@st.com>
Cc: Jagannadh Teki <jteki@openedev.com>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>
---
Changes for v5
- shuffling the patches
Changes for v4
- no changes
Changes for v3
- Remove the printout
Changes for v2
- no changes
---
 drivers/spi/cadence_qspi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 5756178..4f7fd52 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -122,6 +122,9 @@ static int cadence_spi_set_speed(struct udevice *bus, uint hz)
 	struct cadence_spi_priv *priv = dev_get_priv(bus);
 	int err;
 
+	if (hz > plat->max_hz)
+		hz = plat->max_hz;
+
 	/* Disable QSPI */
 	cadence_qspi_apb_controller_disable(priv->regbase);
 
-- 
2.2.0

[U-Boot] [PATCH v5 4/5] spi: cadence_qspi: Ensure check for max frequency in place

[Marek Vasut]

On Saturday, October 17, 2015 at 03:32:38 PM, Chin Liang See wrote:
> Ensure the intended SCLK frequency not exceeding the maximum
> frequency. If that happen, SCLK will set to maximum frequency.
> 
> Signed-off-by: Chin Liang See <clsee@altera.com>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Dinh Nguyen <dinh.linux@gmail.com>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Vikas Manocha <vikas.manocha@st.com>
> Cc: Jagannadh Teki <jteki@openedev.com>
> Cc: Pavel Machek <pavel@denx.de>
> Acked-by: Pavel Machek <pavel@denx.de>

Acked-by: Marek Vasut <marex@denx.de>

Best regards,
Marek Vasut

[U-Boot] [PATCH v5 4/5] spi: cadence_qspi: Ensure check for max frequency in place

[Chin Liang See]

On Sat, 2015-10-17 at 16:14 +0200, marex at denx.de wrote:
> On Saturday, October 17, 2015 at 03:32:38 PM, Chin Liang See wrote:
> > Ensure the intended SCLK frequency not exceeding the maximum
> > frequency. If that happen, SCLK will set to maximum frequency.
> > 
> > Signed-off-by: Chin Liang See <clsee@altera.com>
> > Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> > Cc: Dinh Nguyen <dinh.linux@gmail.com>
> > Cc: Marek Vasut <marex@denx.de>
> > Cc: Stefan Roese <sr@denx.de>
> > Cc: Vikas Manocha <vikas.manocha@st.com>
> > Cc: Jagannadh Teki <jteki@openedev.com>
> > Cc: Pavel Machek <pavel@denx.de>
> > Acked-by: Pavel Machek <pavel@denx.de>
> 
> Acked-by: Marek Vasut <marex@denx.de>
> 

Thanks Marek for the review.

I noticed these patches yet to be applied.
Wonder you able to apply these?

Thanks
Chin Liang

> Best regards,
> Marek Vasut

[U-Boot] [PATCH v5 4/5] spi: cadence_qspi: Ensure check for max frequency in place

[Marek Vasut]

On Wednesday, November 04, 2015 at 03:51:56 PM, Chin Liang See wrote:
> On Sat, 2015-10-17 at 16:14 +0200, marex at denx.de wrote:
> > On Saturday, October 17, 2015 at 03:32:38 PM, Chin Liang See wrote:
> > > Ensure the intended SCLK frequency not exceeding the maximum
> > > frequency. If that happen, SCLK will set to maximum frequency.
> > > 
> > > Signed-off-by: Chin Liang See <clsee@altera.com>
> > > Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> > > Cc: Dinh Nguyen <dinh.linux@gmail.com>
> > > Cc: Marek Vasut <marex@denx.de>
> > > Cc: Stefan Roese <sr@denx.de>
> > > Cc: Vikas Manocha <vikas.manocha@st.com>
> > > Cc: Jagannadh Teki <jteki@openedev.com>
> > > Cc: Pavel Machek <pavel@denx.de>
> > > Acked-by: Pavel Machek <pavel@denx.de>
> > 
> > Acked-by: Marek Vasut <marex@denx.de>
> 
> Thanks Marek for the review.
> 
> I noticed these patches yet to be applied.
> Wonder you able to apply these?

Sorry about that, applied all five, thanks!

Best regards,
Marek Vasut

[U-Boot] [PATCH v5 4/5] spi: cadence_qspi: Ensure check for max frequency in place

[Chin Liang See]

On Thu, 2015-11-05 at 02:34 +0100, marex at denx.de wrote:
> On Wednesday, November 04, 2015 at 03:51:56 PM, Chin Liang See wrote:
> > On Sat, 2015-10-17 at 16:14 +0200, marex at denx.de wrote:
> > > On Saturday, October 17, 2015 at 03:32:38 PM, Chin Liang See wrote:
> > > > Ensure the intended SCLK frequency not exceeding the maximum
> > > > frequency. If that happen, SCLK will set to maximum frequency.
> > > > 
> > > > Signed-off-by: Chin Liang See <clsee@altera.com>
> > > > Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> > > > Cc: Dinh Nguyen <dinh.linux@gmail.com>
> > > > Cc: Marek Vasut <marex@denx.de>
> > > > Cc: Stefan Roese <sr@denx.de>
> > > > Cc: Vikas Manocha <vikas.manocha@st.com>
> > > > Cc: Jagannadh Teki <jteki@openedev.com>
> > > > Cc: Pavel Machek <pavel@denx.de>
> > > > Acked-by: Pavel Machek <pavel@denx.de>
> > > 
> > > Acked-by: Marek Vasut <marex@denx.de>
> > 
> > Thanks Marek for the review.
> > 
> > I noticed these patches yet to be applied.
> > Wonder you able to apply these?
> 
> Sorry about that, applied all five, thanks!

No worries, thanks Marek!

Thanks
Chin Liang

> 
> Best regards,
> Marek Vasut