From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Mon, 26 Oct 2015 21:24:00 +0100 Subject: [U-Boot] [PATCH] nios2: add memory to board info In-Reply-To: <1445851172-23473-1-git-send-email-thomas@wytron.com.tw> References: <1445851172-23473-1-git-send-email-thomas@wytron.com.tw> Message-ID: <201510262124.00891.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday, October 26, 2015 at 10:19:32 AM, Thomas Chou wrote: > Run setup_board_part1/2 and add memory information to board info > structure. So that it can display correct values in bdinfo command. > > Signed-off-by: Thomas Chou > --- > common/board_f.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/common/board_f.c b/common/board_f.c > index d88ada3..6ab74d9 100644 > --- a/common/board_f.c > +++ b/common/board_f.c > @@ -551,7 +551,7 @@ static int display_new_sp(void) > return 0; > } > > -#if defined(CONFIG_PPC) || defined(CONFIG_M68K) > +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_NIOS2) This looks like some ancient code, due to the fact that it's used on PPC and M68K only, but not on ARM for example. > static int setup_board_part1(void) > { > bd_t *bd = gd->bd; > @@ -933,7 +933,7 @@ static init_fnc_t init_sequence_f[] = { > reserve_stacks, > setup_dram_config, > show_dram_config, > -#if defined(CONFIG_PPC) || defined(CONFIG_M68K) > +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_NIOS2) > setup_board_part1, > INIT_FUNC_WATCHDOG_RESET > setup_board_part2, Best regards, Marek Vasut