[U-Boot] [PATCH V2 01/14] mxs: add parameter base_addr for mxs_set_lcdclk

[Peng Fan <b51431@freescale.com>]

Hi Stefano,

On Mon, Oct 26, 2015 at 04:52:59PM +0100, Stefano Babic wrote:
>Hi Peng,
>
>On 26/10/2015 03:57, Peng Fan wrote:
>> Hi Stefano,
>> 
>> Sorry for this late reply.
>> 
>> On Tue, Oct 20, 2015 at 03:05:05PM +0200, Stefano Babic wrote:
>>> Hi Peng,
>>>
>>>
>>> On 20/10/2015 13:39, Peng Fan wrote:
>>>> Change mxs_set_lcdclk prototype to add a new parameter
>>>> base_addr. There are two LCD interfaces for i.MX6SX,
>>>> we may support LCDIF1 or LCDIF2.
>>>>
>>>
>>> ok - from your commit message I am waiting that both LCDIF1 and LCDIF2
>>> can be supported, and a user (board maintainer) can switch between them.
>>> And in later patch mxs_set_lcdclk() is avalilable for mx6sx and mx6ul,
>>> that makes this inconsistent.
>> 
>> I can not get you about 'inconsistent'.
>> 
>> The reason to add LCDIF1 and LCDIF2
>> support is that the board design may use LCDIF1 or LCDIF2. The mxs_set_lcdlck
>> should support setting clock for LCDIF1 and LCDIF2.
>> 
>> There two LCDIFs for i.MX6SX and i.MX7D.
>
>This is fine, but I had the impression that the patch supports LCDIF1 on
>mx6(sx|ul) and mx7, not LCDIF2. It looks like I have misunderstood. Can
>you help me to better understand ? Does it really work with LCDIF2 ?

The patch set contains clk related register settings, see mxs_set_lcdclk,
in patch [PATCH V2 07/14] imx: mx6: add clock api for lcdif.
I need to address your comments about this patch.
The is_cpu_type(MXC_CPU_MX6SX) handles the LCDIF2.

I have not tested it for lCDIF2, but it's in fsl's vendor uboot, it should work.
For now, I only have 6ul and 7d in hand to test LCDIF1.

Regards,
Peng.

>
>> 
>>>
>>> But I do not understand how the support for the second LCDIF is
>>> implemented. I should see that the register set points to LCDIF1 or LCDIF2.
>
>Again this is the point I misunderstand.
>
>
>Best regards,
>Stefano Babic
>
>-- 
>=====================================================================
>DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
>=====================================================================

--