From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Fri, 30 Oct 2015 17:24:52 +0100
Subject: [U-Boot] [PATCH v3] colibri_vf: Add board_usb_phy_mode function
In-Reply-To: <000f9cfe36d92b1a50828de92335787a@agner.ch>
References: <3e44b4bdb032e372519551149dd09cba2973f2c0.1446112949.git.maitysanchayan@gmail.com>
 <9cf04e590d9a337077b849ae57cadeab48095c76.1446207724.git.maitysanchayan@gmail.com>
 <000f9cfe36d92b1a50828de92335787a@agner.ch>
Message-ID: <201510301724.52271.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Friday, October 30, 2015 at 05:12:54 PM, Stefan Agner wrote:
> Hi All,

Hi!

> On 2015-10-30 05:26, Sanchayan Maity wrote:
> > +
> > +int board_usb_phy_mode(int port)
> > +{
> > +	switch (port) {
> > +	case 0:
> > +		return gpio_get_value(USB_CDET_GPIO);
> > +		break;
> > +	case 1:
> > +		return USB_INIT_HOST;
> > +		break;
> > +	default:
> > +		return USB_INIT_HOST;
> > +		break;
> 
> One thing I would like to note in this whole discussion is that the old
> setup is kind of the "default" role of each dual-role controller: The
> boot ROM uses USB1 as client, the tower board uses this configuration
> too... So maybe we could/should keep that default role at least in here?

Well we cannot, since this is a custom board, right ?

Best regards,
Marek Vasut