[U-Boot] [PATCH] arm: socfpga: reset: correct dma, qspi, and sdmmc reset bit defines

[U-Boot] [PATCH] arm: socfpga: reset: correct dma, qspi, and sdmmc reset bit defines

[dinguyen at opensource.altera.com]

From: Dinh Nguyen <dinguyen@opensource.altera.com>

The DMA, QSPI, and SD/MMC reset bits are located in the permodrst register,
not the mpumodrst. So the bank for these reset bits should be 1, not 0.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
 arch/arm/mach-socfpga/include/mach/reset_manager.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager.h b/arch/arm/mach-socfpga/include/mach/reset_manager.h
index 8e59578..666a2ef 100644
--- a/arch/arm/mach-socfpga/include/mach/reset_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/reset_manager.h
@@ -69,9 +69,9 @@ struct socfpga_reset_manager {
 #define RSTMGR_UART0		RSTMGR_DEFINE(1, 16)
 #define RSTMGR_SPIM0		RSTMGR_DEFINE(1, 18)
 #define RSTMGR_SPIM1		RSTMGR_DEFINE(1, 19)
-#define RSTMGR_QSPI		RSTMGR_DEFINE(0, 5)
-#define RSTMGR_SDMMC		RSTMGR_DEFINE(0, 22)
-#define RSTMGR_DMA		RSTMGR_DEFINE(0, 28)
+#define RSTMGR_QSPI		RSTMGR_DEFINE(1, 5)
+#define RSTMGR_SDMMC		RSTMGR_DEFINE(1, 22)
+#define RSTMGR_DMA		RSTMGR_DEFINE(1, 28)
 #define RSTMGR_SDR		RSTMGR_DEFINE(1, 29)
 
 /* Create a human-readable reference to SoCFPGA reset. */
-- 
2.6.2

[U-Boot] [PATCH] arm: socfpga: reset: correct dma, qspi, and sdmmc reset bit defines

[Marek Vasut]

On Tuesday, November 03, 2015 at 12:11:21 AM, dinguyen at opensource.altera.com 
wrote:
> From: Dinh Nguyen <dinguyen@opensource.altera.com>
> 
> The DMA, QSPI, and SD/MMC reset bits are located in the permodrst register,
> not the mpumodrst. So the bank for these reset bits should be 1, not 0.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

Thanks for finding this:
Acked-by: Marek Vasut <marex@denx.de>

btw. how did you find this? I doubt it was some casual reading of the source
code :)

Best regards,
Marek Vasut

[U-Boot] [PATCH] arm: socfpga: reset: correct dma, qspi, and sdmmc reset bit defines

[Dinh Nguyen]

On Tue, 3 Nov 2015, Marek Vasut wrote:

> On Tuesday, November 03, 2015 at 12:11:21 AM, dinguyen at opensource.altera.com 
> wrote:
> > From: Dinh Nguyen <dinguyen@opensource.altera.com>
> > 
> > The DMA, QSPI, and SD/MMC reset bits are located in the permodrst register,
> > not the mpumodrst. So the bank for these reset bits should be 1, not 0.
> > 
> > Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> 
> Thanks for finding this:
> Acked-by: Marek Vasut <marex@denx.de>
> 
> btw. how did you find this? I doubt it was some casual reading of the source
> code :)
> 

I stumbled on this when I started adding the reset driver for Arria10, and did
a quick code review. 

BR,
Dinh

[U-Boot] [PATCH] arm: socfpga: reset: correct dma, qspi, and sdmmc reset bit defines

[Marek Vasut]

On Tuesday, November 03, 2015 at 04:13:37 AM, Dinh Nguyen wrote:
> On Tue, 3 Nov 2015, Marek Vasut wrote:
> > On Tuesday, November 03, 2015 at 12:11:21 AM,
> > dinguyen at opensource.altera.com
> > 
> > wrote:
> > > From: Dinh Nguyen <dinguyen@opensource.altera.com>
> > > 
> > > The DMA, QSPI, and SD/MMC reset bits are located in the permodrst
> > > register, not the mpumodrst. So the bank for these reset bits should
> > > be 1, not 0.
> > > 
> > > Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> > 
> > Thanks for finding this:
> > Acked-by: Marek Vasut <marex@denx.de>
> > 
> > btw. how did you find this? I doubt it was some casual reading of the
> > source code :)
> 
> I stumbled on this when I started adding the reset driver for Arria10, and
> did a quick code review.

Neat !

Best regards,
Marek Vasut

[U-Boot] [PATCH] arm: socfpga: reset: correct dma, qspi, and sdmmc reset bit defines

[Marek Vasut]

On Tuesday, November 03, 2015 at 12:11:21 AM, dinguyen at opensource.altera.com 
wrote:
> From: Dinh Nguyen <dinguyen@opensource.altera.com>
> 
> The DMA, QSPI, and SD/MMC reset bits are located in the permodrst register,
> not the mpumodrst. So the bank for these reset bits should be 1, not 0.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

Applied, thanks!

Best regards,
Marek Vasut