[U-Boot] [PATCH v5 1/2] usb: zynqmp: Add XHCI driver support

[Marek Vasut <marex@denx.de>]

On Monday, November 16, 2015 at 06:59:13 AM, Siva Durga Prasad Paladugu wrote:
> From: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
> 
> Added USB XHCI driver support for zynqmp.
> 
> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

Hi!

[...]

> +static struct zynqmp_xhci zynqmp_xhci;
> +
> +unsigned long ctr_addr[] = CONFIG_ZYNQMP_XHCI_LIST;

Still no DM/DT support on Xilinx parts, huh ? :)

[...]

> +int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor
> **hcor) +{
> +	struct zynqmp_xhci *ctx = &zynqmp_xhci;
> +	int ret = 0;
> +
> +	if (index < 0 || index >= ARRAY_SIZE(ctr_addr))
> +		return -EINVAL;
> +
> +	ctx->hcd = (struct xhci_hccr *)ctr_addr[index];
> +	ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);

Should be void *, not char * I think. Also, the parenthesis around ctx->hcd
are not needed.

> +	ret = board_usb_init(index, USB_INIT_HOST);
> +	if (ret != 0) {
> +		puts("Failed to initialize board for USB\n");
> +		return ret;
> +	}
> +
> +	ret = zynqmp_xhci_core_init(ctx);
> +	if (ret < 0) {
> +		puts("Failed to initialize xhci\n");
> +		return ret;
> +	}
> +
> +	*hccr = (struct xhci_hccr *)ctx->hcd;
> +	*hcor = (struct xhci_hcor *)((uint32_t) *hccr
> +				+ HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));

You want to use uintptr_t for the same of 64bit parts.

> +	debug("zynqmp-xhci: init hccr %x and hcor %x hc_length %d\n",
> +	      (uint32_t)*hccr, (uint32_t)*hcor,
> +	      (uint32_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));

We have %p for printing pointers, so drop the casts.

Also, since you're using HC_LENGTH() here twice, you might as well put it's
value into temporary variable and use it in both places, it might make the
code slightly more readable.

> +	return ret;
> +}
> +
> +void xhci_hcd_stop(int index)
> +{
> +	/*
> +	 * Currently zynqmp socs do not support PHY shutdown from
> +	 * sw. But this support may be added in future socs.
> +	 */
> +
> +	return 0;
> +}
> diff --git a/include/configs/xilinx_zynqmp_ep.h
> b/include/configs/xilinx_zynqmp_ep.h index ed6023a..1845622 100644
> --- a/include/configs/xilinx_zynqmp_ep.h
> +++ b/include/configs/xilinx_zynqmp_ep.h
> @@ -23,6 +23,8 @@
>  #define CONFIG_SYS_I2C_ZYNQ
>  #define CONFIG_ZYNQ_EEPROM
>  #define CONFIG_AHCI
> +#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
> +				 ZYNQMP_USB1_XHCI_BASEADDR}
> 
>  #include <configs/xilinx_zynqmp.h>