From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 21/25] dm: usb: Convert echi-pci to use new DM PCI API
Date: Tue, 17 Nov 2015 09:03:25 +0100 [thread overview]
Message-ID: <201511170903.26030.marex@denx.de> (raw)
In-Reply-To: <1447732444-30892-22-git-send-email-sjg@chromium.org>
On Tuesday, November 17, 2015 at 04:53:59 AM, Simon Glass wrote:
> Convert this driver to use the new driver model PCI API.
Nit, in the subject, it should be ehci, not echi ;-)
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> drivers/usb/host/ehci-pci.c | 43
> +++++++++++++++++++++++++++++++++++-------- 1 file changed, 35
> insertions(+), 8 deletions(-)
[...]
> @@ -38,12 +40,12 @@ static void ehci_pci_common_init(pci_dev_t pdev, struct
> ehci_hccr **ret_hccr, *ret_hcor = hcor;
>
> /* enable busmaster */
> - pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
> + dm_pci_read_config32(dev, PCI_COMMAND, &cmd);
Is the dm_ prefix really needed on these functions ?
> cmd |= PCI_COMMAND_MASTER;
> - pci_write_config_dword(pdev, PCI_COMMAND, cmd);
> + dm_pci_write_config32(dev, PCI_COMMAND, cmd);
> }
>
> -#ifndef CONFIG_DM_USB
> +#else
>
> #ifdef CONFIG_PCI_EHCI_DEVICE
> static struct pci_device_id ehci_pci_ids[] = {
> @@ -55,6 +57,31 @@ static struct pci_device_id ehci_pci_ids[] = {
> };
> #endif
>
> +static void ehci_pci_legacy_init(pci_dev_t pdev, struct ehci_hccr
> **ret_hccr, + struct ehci_hcor **ret_hcor)
> +{
> + struct ehci_hccr *hccr;
> + struct ehci_hcor *hcor;
> + uint32_t cmd;
> +
> + hccr = (struct ehci_hccr *)pci_map_bar(pdev,
> + PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
> + hcor = (struct ehci_hcor *)((uint32_t) hccr +
This should be uintptr_t instead of uint32_t . Oh, and uint32_t should
not be used, use u32 where applicable.
> + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> + debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
> + (uint32_t)hccr, (uint32_t)hcor,
> + (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> + *ret_hccr = hccr;
> + *ret_hcor = hcor;
> +
> + /* enable busmaster */
> + pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
> + cmd |= PCI_COMMAND_MASTER;
> + pci_write_config_dword(pdev, PCI_COMMAND, cmd);
> +}
[...]
Best regards,
Marek Vasut
next prev parent reply other threads:[~2015-11-17 8:03 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 3:53 [U-Boot] [PATCH 00/25] dm: Conversion of code to the new driver model PCI API Simon Glass
2015-11-17 3:53 ` [U-Boot] [PATCH 01/25] dm: pci: Mark legacy files as such Simon Glass
2015-11-18 4:26 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 02/25] dm: pci: Use driver model PCI API in auto-config Simon Glass
2015-11-18 4:26 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 03/25] dm: pci: Add a driver-model version of pci_find_device() Simon Glass
2015-11-18 4:26 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 04/25] dm: pci: scsi: Use driver-model PCI API Simon Glass
2015-11-18 4:26 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 05/25] dm: pci: Add a driver-model version of pci_find_class() Simon Glass
2015-11-18 4:27 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 06/25] dm: pci: Add a function to read a PCI BAR Simon Glass
2015-11-18 4:27 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 07/25] dm: serial: Convert ns16550 driver to use driver model PCI API Simon Glass
2015-11-18 4:27 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 08/25] dm: x86: ivybridge: Convert graphics init to use DM " Simon Glass
2015-11-18 4:27 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 09/25] dm: Convert bios_interrupts " Simon Glass
2015-11-18 4:27 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 10/25] dm: pci: video: Convert video and pci_rom " Simon Glass
2015-11-18 4:27 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 11/25] dm: x86: pci: Adjust bios_run_on_x86() to use the " Simon Glass
2015-11-18 4:47 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 12/25] dm: pci: Drop the old version of pci_find_device() Simon Glass
2015-11-18 4:48 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 13/25] dm: pci: Drop the old version of pci_find_class() Simon Glass
2015-11-18 4:48 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 14/25] dm: tegra: net: Convert tegra boards to driver model for Ethernet Simon Glass
2015-11-18 4:48 ` Bin Meng
2015-11-18 21:35 ` Stephen Warren
2015-11-18 22:14 ` Simon Glass
2015-11-18 22:52 ` Stephen Warren
2015-11-17 3:53 ` [U-Boot] [PATCH 15/25] dm: test: Convert PCI tests to use the DM PCI API Simon Glass
2015-11-18 4:48 ` Bin Meng
2015-11-29 6:05 ` Simon Glass
2015-11-17 3:53 ` [U-Boot] [PATCH 16/25] dm: x86: Convert x86 PCI functions over to " Simon Glass
2015-11-18 5:16 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 17/25] dm: pci: Add driver model API functions for address mapping Simon Glass
2015-11-18 5:16 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 18/25] dm: net: Convert rtl8169 to use DM PCI API Simon Glass
2015-11-18 5:16 ` Bin Meng
2015-11-23 23:32 ` Joe Hershberger
2015-11-30 23:17 ` Simon Glass
2015-11-17 3:53 ` [U-Boot] [PATCH 19/25] dm: pci: Switch to DM API for PCI address mapping Simon Glass
2015-11-18 5:16 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 20/25] dm: ahci: Convert to use new DM PCI API Simon Glass
2015-11-18 5:16 ` Bin Meng
2015-11-17 3:53 ` [U-Boot] [PATCH 21/25] dm: usb: Convert echi-pci " Simon Glass
2015-11-17 8:03 ` Marek Vasut [this message]
2015-11-18 5:16 ` Bin Meng
2015-11-17 3:54 ` [U-Boot] [PATCH 22/25] dm: Convert PCI MMC over to use " Simon Glass
2015-11-18 5:16 ` Bin Meng
2015-11-29 6:05 ` Simon Glass
2015-11-17 3:54 ` [U-Boot] [PATCH 23/25] pci: Tidy up comments in pci_bind_bus_devices() Simon Glass
2015-11-18 6:57 ` Bin Meng
2015-11-17 3:54 ` [U-Boot] [PATCH 24/25] dm: net: usb: Refactor mcs7830 driver ready for DM conversion Simon Glass
2015-11-23 23:22 ` Joe Hershberger
2015-11-17 3:54 ` [U-Boot] [PATCH 25/25] dm: net: usb: Convert mcs7830 driver to support driver model Simon Glass
2015-11-23 23:22 ` Joe Hershberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201511170903.26030.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox