[U-Boot] [PATCH 10/10] ARM: socfpga: arria10: add support for building Arria10

[Marek Vasut <marex@denx.de>]

On Monday, November 23, 2015 at 03:36:14 PM, Dinh Nguyen wrote:
> On 11/20/2015 06:49 AM, Marek Vasut wrote:
> > On Friday, November 20, 2015 at 12:28:47 AM, Dinh Nguyen wrote:
> >> On 11/19/2015 04:45 PM, Marek Vasut wrote:
> >>> On Thursday, November 19, 2015 at 10:35:47 PM,
> >>> dinguyen at opensource.altera.com
> >>> 
> >>> wrote:
> >>>> From: Dinh Nguyen <dinguyen@opensource.altera.com>
> >>>> 
> >>>> Update Makefile to build Arria 10.
> >>>> 
> >>>> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> >>>> ---
> >>>> 
> >>>>  arch/arm/mach-socfpga/Makefile         | 7 +++++--
> >>>>  arch/arm/mach-socfpga/arria10/Makefile | 7 +++++++
> >>>>  2 files changed, 12 insertions(+), 2 deletions(-)
> >>>>  create mode 100644 arch/arm/mach-socfpga/arria10/Makefile
> >>>> 
> >>>> diff --git a/arch/arm/mach-socfpga/Makefile
> >>>> b/arch/arm/mach-socfpga/Makefile index 316b326..0dbe9bb 100644
> >>>> --- a/arch/arm/mach-socfpga/Makefile
> >>>> +++ b/arch/arm/mach-socfpga/Makefile
> >>>> @@ -6,15 +6,18 @@
> >>>> 
> >>>>  #
> >>>>  # SPDX-License-Identifier:	GPL-2.0+
> >>>>  #
> >>>> 
> >>>> -
> >>>> +ifneq ($(CONFIG_TARGET_SOCFPGA_ARRIA10),y)
> >>>> 
> >>>>  obj-y	+= misc.o timer.o reset_manager.o system_manager.o
> >>> 
> >>> clock_manager.o \
> >>> 
> >>>>  	   fpga_manager.o scan_manager.o
> >>>>  
> >>>>  obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
> >>>> 
> >>>> -
> >>>> 
> >>>>  # QTS-generated config file wrappers
> >>>>  obj-y	+= wrap_pll_config.o
> >>>>  obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o	\
> >>>>  
> >>>>  			   wrap_sdram_config.o
> >>>> 
> >>>> +else
> >>>> +obj-y	+= arria10/
> >>> 
> >>> So why exactly does A10 have it's own dedicated dir if most of the code
> >>> is probably shared between A10 and AV/CV ?
> >> 
> >> Yes, there are some sharing. But I think that there will be enough
> >> differences that will ultimately warrant it's own directory. I think
> >> with it's own directory, the Makefile changes stay a bit cleaner. I
> > 
> > Linux doesn't seem to require a separate directory though, does it ?
> > I'm not convinced we need one either.
> > 
> >> One of the biggest differences is that the A10's SDRAM support is going
> >> to be a bit ugly.
> > 
> > The SDRAM code goes into drivers/ddr/ , no problem.
> > 
> >> The main point is that we need to program the FPGA
> >> during U-Boot booting up with a ~>10 MB rbf file while being limited to
> >> the OCRAM's size. I would like to contain this ugliness in it's own
> >> directory.
> > 
> > What's the problem with this ? We already support loading files from
> > storage in SPL, so just compile the FPGA manager into SPL as well and
> > use it.
> 
> Ok, let me re-work it all under the c5/a5 directory. Thanks for reviewing.

But you didn't really answer my question -- what is the problem with the FPGA
loader in SPL ?