From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Thu, 26 Nov 2015 01:50:25 +0100 Subject: [U-Boot] [PATCH] mmc: socfpga_dw_mmc: Move drvsel and smplsel to dts In-Reply-To: <1448498472-2573-1-git-send-email-clsee@altera.com> References: <1448498472-2573-1-git-send-email-clsee@altera.com> Message-ID: <201511260150.25454.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thursday, November 26, 2015 at 01:41:12 AM, clsee wrote: > From: Chin Liang See > > socfpga_dw_mmc driver will obtain the drvsel and > smplsel value from device tree instead of definition > in config header file. > > Signed-off-by: Chin Liang See > Cc: Dinh Nguyen > Cc: Dinh Nguyen > Cc: Pavel Machek > Cc: Marek Vasut > Cc: Stefan Roese > Cc: Pantelis Antoniou > Cc: Simon Glass > Cc: Jaehoon Chung > --- > arch/arm/dts/socfpga_cyclone5.dtsi | 2 ++ > drivers/mmc/socfpga_dw_mmc.c | 24 ++++++++++++++++++++++-- > include/configs/socfpga_common.h | 2 -- > 3 files changed, 24 insertions(+), 4 deletions(-) Hi! [...] > @@ -78,11 +87,19 @@ static int socfpga_dwmci_of_probe(const void *blob, int > node, const int idx) return -EINVAL; > } > > + drvsel = fdtdec_get_uint(blob, node, "drvsel", 0); The default value here should be 3, otherwise this won't preserve the original behavior of the driver in case the nodes in DT are missing. > + smplsel = fdtdec_get_uint(blob, node, "smplsel", 0); > + > /* Allocate the host */ > host = calloc(1, sizeof(*host)); > if (!host) > return -ENOMEM; > > + /* Allocate the priv */ > + priv = calloc(1, sizeof(*priv)); > + if (!priv) > + return -ENOMEM; If this call fails, you're leaking memory, since you calloc() some stuff before. > + > host->name = "SOCFPGA DWMMC"; > host->ioaddr = (void *)reg_base; > host->buswidth = bus_width; > @@ -92,6 +109,9 @@ static int socfpga_dwmci_of_probe(const void *blob, int > node, const int idx) host->bus_hz = clk; > host->fifoth_val = MSIZE(0x2) | > RX_WMARK(fifo_depth / 2 - 1) | TX_WMARK(fifo_depth / 2); > + priv->drvsel = drvsel; > + priv->smplsel = smplsel; > + host->priv = priv; You can move the fdtdec_get_uint() calls here directly, no need to introduce ad-hoc variable and then just assign it into the private data. > return add_dwmci(host, host->bus_hz, 400000); > } > diff --git a/include/configs/socfpga_common.h > b/include/configs/socfpga_common.h index f6808b5..b661cc2 100644 > --- a/include/configs/socfpga_common.h > +++ b/include/configs/socfpga_common.h > @@ -153,8 +153,6 @@ > #define CONFIG_DWMMC > #define CONFIG_SOCFPGA_DWMMC > #define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024 > -#define CONFIG_SOCFPGA_DWMMC_DRVSEL 3 > -#define CONFIG_SOCFPGA_DWMMC_SMPSEL 0 > /* FIXME */ > /* using smaller max blk cnt to avoid flooding the limited stack we have > */ #define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */