[U-Boot] [PATCH v1] arm: socfpga: Enable load zImage and Linux DTB from USB

[Marek Vasut <marex@denx.de>]

On Friday, November 27, 2015 at 02:38:57 AM, Chin Liang See wrote:
> Hi Marek,
> 
> On Thu, 2015-11-26 at 12:04 +0100, Marek Vasut wrote:
> > On Thursday, November 26, 2015 at 07:14:56 AM, Stefan Roese wrote:
> > > On 26.11.2015 04:17, Chin Liang See wrote:
> > > > Adding new environment usbload which will load zImage and
> > > > Linux DTB from USB mass storage through FAT file system.
> > > > 
> > > > Signed-off-by: Chin Liang See <clsee@altera.com>
> > > > Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> > > > Cc: Dinh Nguyen <dinh.linux@gmail.com>
> > > > Cc: Pavel Machek <pavel@denx.de>
> > > > Cc: Marek Vasut <marex@denx.de>
> > > > Cc: Stefan Roese <sr@denx.de>
> > > > ---
> > > > 
> > > >   include/configs/socfpga_arria5_socdk.h   | 5 ++++-
> > > >   include/configs/socfpga_cyclone5_socdk.h | 5 ++++-
> > > >   2 files changed, 8 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/include/configs/socfpga_arria5_socdk.h
> > > > b/include/configs/socfpga_arria5_socdk.h index 0506336..f488b00
> > > > 100644
> > > > --- a/include/configs/socfpga_arria5_socdk.h
> > > > +++ b/include/configs/socfpga_arria5_socdk.h
> > > > @@ -100,7 +100,10 @@
> > > > 
> > > >   		"sf read ${fdt_addr} ${qspifdtaddr}
> > > > 
> > > > ${fdtimagesize};\0" \
> > > > 
> > > >   	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
> > > >   	
> > > >   		" root=${qspiroot} rw
> > > > 
> > > > rootfstype=${qspirootfstype};"\
> > > > 
> > > > -		"bootm ${loadaddr} - ${fdt_addr}\0"
> > > > +		"bootm ${loadaddr} - ${fdt_addr}\0" \
> > > > +	"usbload=usb reset;" \
> > > > +		"fatload usb 0 ${loadaddr} ${bootimage};" \
> > > > +		"fatload usb 0 ${fdt_addr} ${fdtimage}\0"
> > > > 
> > > >   /* The rest of the configuration is shared */
> > > >   #include <configs/socfpga_common.h>
> > > > 
> > > > diff --git a/include/configs/socfpga_cyclone5_socdk.h
> > > > b/include/configs/socfpga_cyclone5_socdk.h index d7369ee..40a4f08
> > > > 100644
> > > > --- a/include/configs/socfpga_cyclone5_socdk.h
> > > > +++ b/include/configs/socfpga_cyclone5_socdk.h
> > > > @@ -100,7 +100,10 @@
> > > > 
> > > >   		"sf read ${fdt_addr} ${qspifdtaddr}
> > > > 
> > > > ${fdtimagesize};\0" \
> > > > 
> > > >   	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
> > > >   	
> > > >   		" root=${qspiroot} rw
> > > > 
> > > > rootfstype=${qspirootfstype};"\
> > > > 
> > > > -		"bootm ${loadaddr} - ${fdt_addr}\0"
> > > > +		"bootm ${loadaddr} - ${fdt_addr}\0" \
> > > > +	"usbload=usb reset;" \
> > > > +		"fatload usb 0 ${loadaddr} ${bootimage};" \
> > > > +		"fatload usb 0 ${fdt_addr} ${fdtimage}\0"
> > > 
> > > Again, please use the generic FS commands here, e.g. "load" instead
> > > of "fatload".
> > > 
> > > And doesn't it make sense to consolidate these common, identical
> > > commands into a common file (socfpga_common.h)?
> > 
> > Even better -- why not switch to distro_bootcmd and/or update it to
> > support
> > booting from USB (it probably already does).
> 
> Thanks for sharing this. I presume we need a script to store the boot
> command? Let me read more on this.

Yeah, it'd be much better than this ad-hoc stuff.

Best regards,
Marek Vasut