[U-Boot] [PATCH] arm: socfpga: fix up a questionable macro for SDMMC

[Marek Vasut <marex@denx.de>]

On Wednesday, December 02, 2015 at 12:33:02 AM, Dinh Nguyen wrote:
> On 12/01/2015 05:30 PM, Marek Vasut wrote:
> > On Wednesday, December 02, 2015 at 12:20:47 AM,
> > dinguyen at opensource.altera.com
> > 
> > wrote:
> >> From: Dinh Nguyen <dinguyen@opensource.altera.com>
> >> 
> >> Not sure what made this macro questionable, but edit the macro to be
> >> similar to what is used in Linux.
> > 
> > It should most likely be dissolved and moved into socfpga_dw_mmc.c ,
> > since it's used only once in there. What do you think ?
> 
> Hmm...if you move this to socfpga_dw_mmc.c then the #if defined(A10)
> would have to follow as the bit for smplsel is at shift 4 instead of 3.
> 
> So if you had this for in system_manager.h, then socfpga_dw_mmc.c
> doesn't have to change.
> 
> --- a/arch/arm/mach-socfpga/include/mach/system_manager.h
> +++ b/arch/arm/mach-socfpga/include/mach/system_manager.h
> @@ -201,8 +201,13 @@ struct socfpga_system_manager {
>  #define SYSMGR_FPGAINTF_NAND   (1 << 4)
>  #define SYSMGR_FPGAINTF_SDMMC  (1 << 5)
> 
> +#if defined(SOCFPGA_GEN5)
>  #define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
>         ((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0))
> +#else /* Arria10 */
> +#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
> +       ((((smplsel) & 0x7) << 4) | (((drvsel) & 0x7) << 0))
> +#endif

Then define the offsets in system_manager.h and then just do
writel((smplsel << OFFSET1) | (drvsel << offset2), ...);
in the MMC driver. That would work without ifdeffery, right ?

Best regards,
Marek Vasut