[U-Boot] [PATCHv4 4/9] arm: socfpga: arria10: add misc functions for Arria10

[Marek Vasut <marex@denx.de>]

On Wednesday, December 02, 2015 at 08:31:28 PM, dinguyen at opensource.altera.com 
wrote:
> From: Dinh Nguyen <dinh.linux@gmail.com>
> 
> Add arch_early_init_r function. The Arria10 has a firewall protection
> around the SDRAM and OCRAM. These firewalls are to be disabled in order
> for U-Boot to function.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> ---
> v4: be consistent and use #if->else throughout
> v3:
> s/reset_assert_all_peripherals_except_l4wd0_l4timer0/socfpga_per_reset_all
> use CONFIG_SOCFPGA_GEN5
> v2: reuse misc functions from a5/c5
> ---
>  arch/arm/mach-socfpga/misc.c | 51
> ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51
> insertions(+)
> 
> diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
> index b110f5b..78774d5 100644
> --- a/arch/arm/mach-socfpga/misc.c
> +++ b/arch/arm/mach-socfpga/misc.c
> @@ -15,6 +15,7 @@
>  #include <watchdog.h>
>  #include <asm/arch/reset_manager.h>
>  #include <asm/arch/scan_manager.h>
> +#include <asm/arch/sdram_a10.h>
>  #include <asm/arch/system_manager.h>
>  #include <asm/arch/dwmmc.h>
>  #include <asm/arch/nic301.h>
> @@ -31,8 +32,15 @@ static struct socfpga_system_manager *sysmgr_regs =
>  	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
>  static struct socfpga_reset_manager *reset_manager_base =
>  	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>  static struct nic301_registers *nic301_regs =
>  	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
> +#else
> +static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
> +	(void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
> +static const struct socfpga_noc_fw_ddr_l3 *noc_fw_ddr_l3_base =
> +	(void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS;
> +#endif
>  static struct scu_registers *scu_regs =
>  	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
> 
> @@ -207,9 +215,14 @@ static int socfpga_fpga_id(const bool print_id)
>  #if defined(CONFIG_DISPLAY_CPUINFO)
>  int print_cpuinfo(void)
>  {
> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>  	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
>  	puts("CPU:   Altera SoCFPGA Platform\n");
>  	socfpga_fpga_id(1);
> +#else
> +	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >> 12) & 0x7;

Is the bsel meaning the same for both Gen5 and Gen10 ? If so, that's fine.
You can improve this code here by defining some bootinfo offset, 0 for gen5
and 12 for gen10 and then you'd only need to ifdef the puts() and the invocation
of socfpga_fpga_id();

Can you send a subsequent patch for this ?

> +	puts("CPU:   Altera SoCFPGA Arria 10\n");
> +#endif
>  	printf("BOOT:  %s\n", bsel_str[bsel].name);
>  	return 0;
>  }
> @@ -292,6 +305,7 @@ int arch_cpu_init(void)

Anyway, let me just apply this.