[U-Boot] [PATCH] arm: socfpga: Don't redefine CONFIG_PHYLIB

[Pavel Machek <pavel@denx.de>]

On Sat 2015-12-05 18:54:01, Marek Vasut wrote:
> On Saturday, December 05, 2015 at 06:25:19 PM, Pavel Machek wrote:
> > On Sat 2015-12-05 15:04:25, Marek Vasut wrote:
> > > On Saturday, December 05, 2015 at 08:50:39 AM, Pavel Machek wrote:
> > > > CONFIG_PHYLIB is already set by the config system
> > > 
> > > Where exactly is it set by the config system ?
> > > 
> > > > don't set it again.
> > > > Avoids ton of warnings.
> > > 
> > > Sorry, I don't seem to be able to replicate these warnings. Can you
> > > provide more details ?
> > 
> > U-boot based on be30dfbabbee12770221f434d2aa08627e712b97 .
> > 
> > pavel at duo:~/amp/u-boot$ grep -ri PHYLIB `find . -name "Kconfig"`
> > ./drivers/net/Kconfig:config PHYLIB
> > ./drivers/net/Kconfig:	     select PHYLIB
> > ./drivers/net/Kconfig:	       100Mbit and 1 Gbit operation. You must
> > enable CONFIG_PHYLIB to
> > ./drivers/net/Kconfig:	select PHYLIB
> > 
> > ALTERA_TSE selects it.
> 
> Altera TSE is not selected on any socfpga platform to my knowledge.
> Could it be your patch which is causing the interference ?

Ok, that explains why you don't see it. I have ALTERA_TSE
enabled. ... which is probably useless, but still should not cause ton
of warnings.

Question is: how to solve it properly?
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html