From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/6] arm: socfpga: Switch CONFIG_HOSTNAME to CONFIG_SYS_BOARD
Date: Mon, 7 Dec 2015 13:01:17 +0100 [thread overview]
Message-ID: <201512071301.17733.marex@denx.de> (raw)
In-Reply-To: <1449482484.2061.4.camel@altera.com>
On Monday, December 07, 2015 at 11:01:24 AM, Chin Liang See wrote:
> On Mon, 2015-12-07 at 09:36 +0100, Marek Vasut wrote:
> > On Monday, December 07, 2015 at 07:25:31 AM, Chin Liang See wrote:
> > > On Sat, 2015-12-05 at 21:44 +0100, Marek Vasut wrote:
> > > > We already have the CONFIG_SYS_BOARD variable, which defines the
> > > > name
> > > > of the board. The value in CONFIG_HOSTNAME is exactly the same
> > > > and is
> > > > thus just a duplicity, so switch it to reuse CONFIG_SYS_BOARD .
> > > >
> > > > Signed-off-by: Marek Vasut <marex@denx.de>
> > > > Cc: Chin Liang See <clsee@altera.com>
> > > > Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> > > > ---
> > > >
> > > > include/configs/socfpga_arria5_socdk.h | 2 --
> > > > include/configs/socfpga_common.h | 4 ++++
> > > > include/configs/socfpga_cyclone5_socdk.h | 2 --
> > > > include/configs/socfpga_de0_nano_soc.h | 2 --
> > > > include/configs/socfpga_mcvevk.h | 2 --
> > > > include/configs/socfpga_sockit.h | 2 --
> > > > include/configs/socfpga_socrates.h | 2 --
> > > > include/configs/socfpga_sr1500.h | 3 ---
> > > > 8 files changed, 4 insertions(+), 15 deletions(-)
> > > >
> > > > diff --git a/include/configs/socfpga_arria5_socdk.h
> > > > b/include/configs/socfpga_arria5_socdk.h
> > > > index a036856..3d5665d 100644
> > > > --- a/include/configs/socfpga_arria5_socdk.h
> > > > +++ b/include/configs/socfpga_arria5_socdk.h
> > > > @@ -56,8 +56,6 @@
> > > >
> > > > #define CONFIG_ENV_OFFSET 512 /* just
> > > >
> > > > after
> > > >
> > > > the MBR */
> > > >
> > > > /* Extra Environment */
> > > >
> > > > -#define CONFIG_HOSTNAME socfpga_arria5
> > > > -
> > > >
> > > > #define CONFIG_EXTRA_ENV_SETTINGS \
> > > >
> > > > "verify=n\0" \
> > > > "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> > > >
> > > > diff --git a/include/configs/socfpga_common.h
> > > > b/include/configs/socfpga_common.h
> > > > index 4b2d246..f74c758 100644
> > > > --- a/include/configs/socfpga_common.h
> > > > +++ b/include/configs/socfpga_common.h
> > > > @@ -69,6 +69,10 @@
> > > >
> > > > #define CONFIG_CMDLINE_EDITING /* Command
> > > >
> > > > history etc */
> > > >
> > > > #define CONFIG_SYS_HUSH_PARSER
> > > >
> > > > +#ifndef CONFIG_SYS_HOSTNAME
> > > > +#define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD
> > > > +#endif
> > > > +
> > >
> > > I saw the change of hostname for socdk would be "socfpga_cyclone5"
> > > to
> > > "cyclone5-socdk" and same for other board. Wonder any impact on
> > > this
> > > change?
> >
> > It should have no impact, unless you're using the hostname in your
> > scripts
> > for something. You would have no way to tell apart the cyclone5
> > boards with
> > the old hostname though, since socfpga_cyclone5 is too generic. In
> > case this
> > breaks some script of yours, setenv hostname socfpga_cyclone5 would
> > fix it.
>
> I grep previously and its not used. But will take note if any side
> effect noticed.
OK, thanks
next prev parent reply other threads:[~2015-12-07 12:01 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-05 20:44 [U-Boot] [PATCH 1/6] arm: socfpga: de0_nano: Zap VIRTUAL_TARGET Marek Vasut
2015-12-05 20:44 ` [U-Boot] [PATCH 2/6] arm: socfpga: sockit: " Marek Vasut
2015-12-07 6:14 ` Chin Liang See
2015-12-05 20:44 ` [U-Boot] [PATCH 3/6] arm: socfpga: Switch CONFIG_G_DNL_MANUFACTURER to CONFIG_SYS_VENDOR Marek Vasut
2015-12-07 6:18 ` Chin Liang See
2015-12-05 20:44 ` [U-Boot] [PATCH 4/6] arm: socfpga: Switch CONFIG_HOSTNAME to CONFIG_SYS_BOARD Marek Vasut
2015-12-07 6:25 ` Chin Liang See
2015-12-07 8:36 ` Marek Vasut
2015-12-07 10:01 ` Chin Liang See
2015-12-07 12:01 ` Marek Vasut [this message]
2015-12-07 12:08 ` Chin Liang See
2015-12-05 20:44 ` [U-Boot] [PATCH 5/6] arm: socfpga: Introduce common board code Marek Vasut
2015-12-07 12:53 ` Chin Liang See
2015-12-07 13:23 ` Marek Vasut
2015-12-07 13:32 ` Chin Liang See
2015-12-07 14:23 ` Marek Vasut
2015-12-07 14:29 ` Chin Liang See
2015-12-07 14:37 ` Marek Vasut
2015-12-07 14:56 ` Chin Liang See
2015-12-07 17:46 ` Marek Vasut
2015-12-08 12:34 ` Chin Liang See
2015-12-08 12:57 ` Marek Vasut
2015-12-09 13:46 ` Chin Liang See
2015-12-05 20:44 ` [U-Boot] [PATCH 6/6] arm: socfpga: Drop the board boilerplate Marek Vasut
2015-12-07 12:56 ` Chin Liang See
2015-12-07 13:22 ` Marek Vasut
2015-12-07 13:29 ` Chin Liang See
2015-12-07 6:11 ` [U-Boot] [PATCH 1/6] arm: socfpga: de0_nano: Zap VIRTUAL_TARGET Chin Liang See
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201512071301.17733.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox