[U-Boot] [PATCH 00/24] usb: s3c-otg: Rename driver to dwc2-otg

[Marek Vasut <marex@denx.de>]

On Thursday, December 10, 2015 at 05:51:12 PM, Marek Vasut wrote:
> On Thursday, December 10, 2015 at 05:07:53 PM, Lukasz Majewski wrote:
> > Hi Marek,
> > 
> > > On Wednesday, December 09, 2015 at 05:06:52 PM, Lukasz Majewski wrote:
> > > > Hi Marek,
> > > > 
> > > > > On Wednesday, December 09, 2015 at 04:02:58 PM, Lukasz Majewski
> > > > > 
> > > > > wrote:
> > > > > > Hi Marek,
> > > > > > 
> > > > > > > On Wednesday, December 09, 2015 at 10:37:42 AM, Lukasz
> > > > > > > Majewski
> > > > > > > 
> > > > > > > wrote:
> > > > > > > > Hi Marek,
> > > > > > > > 
> > > > > > > > > The driver is for the dwc2 otg block , so rename it
> > > > > > > > > accordingly finally.
> > > > > > > > > 
> > > > > > > > > Marek Vasut (24):
> > > > > > > > >   usb: s3c-otg: Rename regs-otg.h to s3c_udc_otg_regs.h
> > > > > > > > >   usb: s3c-otg: Rename struct s3c_udc to dwc2_udc
> > > > > > > > >   usb: s3c-otg: Rename struct s3c_usbotg_reg to
> > > > > > > > > 
> > > > > > > > > dwc2_usbotg_reg usb: s3c-otg: Split private bits from
> > > > > > > > > s3c_udc.h usb: s3c-otg: Rename struct s3c_usbotg_phy to
> > > > > > > > > dwc2_usbotg_phy usb: s3c-otg: Rename struct s3c_dev_*_ep
> > > > > > > > > 
> > > > > > > > >   usb: s3c-otg: Rename struct s3c_ep
> > > > > > > > >   usb: s3c-otg: Rename struct s3c_request
> > > > > > > > >   usb: s3c-otg: Staticize s3c_udc_ep_set_stall
> > > > > > > > >   usb: s3c-otg: Staticize functions in
> > > > > > > > > 
> > > > > > > > > s3c_udc_otg_xfer_dma.c usb: s3c-otg: Rename s3c_ep0_*()
> > > > > > > > > functions usb: s3c-otg: Rename s3c_ep_*() functions
> > > > > > > > > 
> > > > > > > > >   usb: s3c-otg: Rename s3c_udc_*() functions
> > > > > > > > >   usb: s3c-otg: Rename remaining local s3c_*() functions
> > > > > > > > >   usb: s3c-otg: Zap useless externs
> > > > > > > > >   usb: s3c-otg: Change the driver name to dwc2-udc
> > > > > > > > >   usb: s3c-otg: Rename local headers to dwc2_*h
> > > > > > > > >   usb: s3c-otg: Rename sources to dwc2_*c
> > > > > > > > >   usb: s3c-otg: Rename remaining macros
> > > > > > > > >   usb: s3c-otg: Tweak the comments
> > > > > > > > >   usb: s3c-otg: Rename USB_GADGET_S3C_UDC_OTG* to
> > > > > > > > > 
> > > > > > > > > USB_GADGET_DWC2_OTG* usb: s3c-otg: Rename struct
> > > > > > > > > s3c_plat_otg_data
> > > > > > > > > 
> > > > > > > > >   usb: s3c-otg: Rename s3c_udc_probe() function
> > > > > > > > >   usb: s3c-otg: Rename usb/s3c_udc.h to usb/dwc2_udc.h
> > > > > > > > >  
> > > > > > > > >  board/altera/arria5-socdk/socfpga.c                |   6
> > > > > > > > > 
> > > > > > > > > +- board/altera/cyclone5-socdk/socfpga.c              |
> > > > > > > > > 6 +- board/broadcom/bcm28155_ap/bcm28155_ap.c
> > > > > > > > > 
> > > > > > > > > |   8 +-
> > > > > > > > > 
> > > > > > > > > board/denx/mcvevk/socfpga.c                        |   6
> > > > > > > > > +- board/ebv/socrates/socfpga.c                       |
> > > > > > > > > 6 +- board/samsung/goni/goni.c
> > > > > > > > > 
> > > > > > > > > |   6 +-
> > > > > > > > > 
> > > > > > > > > board/samsung/odroid/odroid.c                      |   6
> > > > > > > > > +- board/samsung/trats/trats.c                        |
> > > > > > > > > 8 +- board/samsung/trats2/trats2.c
> > > > > > > > > 
> > > > > > > > > |   6 +-
> > > > > > > > > 
> > > > > > > > > board/samsung/universal_c210/universal.c           |   6
> > > > > > > > > +- board/terasic/sockit/socfpga.c                     |
> > > > > > > > > 6 +- drivers/usb/gadget/Makefile
> > > > > > > > > 
> > > > > > > > > |   4 +-
> > > > > > > > > 
> > > > > > > > > drivers/usb/gadget/bcm_udc_otg_phy.c               |   6
> > > > > > > > > +- .../usb/gadget/{s3c_udc_otg.c => dwc2_udc_otg.c}   |
> > > > > > > > > 205
> > > > > > > > > 
> > > > > > > > > +++++++++++---------- .../{s3c_udc_otg_phy.c =>
> > > > > > > > > dwc2_udc_otg_phy.c}      |  21
> > > > > > > > > ++- .../usb/gadget/dwc2_udc_otg_priv.h                 |
> > > > > > > > > 43 ++--- .../usb/gadget/{regs-otg.h =>
> > > > > > > > > dwc2_udc_otg_regs.h} |  32 ++-- ..._udc_otg_xfer_dma.c =>
> > > > > > > > > dwc2_udc_otg_xfer_dma.c} | 202 ++++++++++----------
> > > > > > > > > include/configs/bcm28155_ap.h                      |   2
> > > > > > > > > +- include/configs/exynos4-common.h                   |
> > > > > > > > > 4 +- include/configs/s5p_goni.h
> > > > > > > > > 
> > > > > > > > > |   4 +-
> > > > > > > > > 
> > > > > > > > > include/configs/s5pc210_universal.h                |   4
> > > > > > > > > +- include/configs/smdkv310.h                         |
> > > > > > > > > 4 +- include/configs/socfpga_common.h
> > > > > > > > > 
> > > > > > > > > |   2 +-
> > > > > > > > > 
> > > > > > > > > include/usb/dwc2_udc.h                             |  23
> > > > > > > > > +++ 25 files changed, 319 insertions(+), 307 deletions(-)
> > > > > > > > > rename drivers/usb/gadget/{s3c_udc_otg.c =>
> > > > > > > > > dwc2_udc_otg.c} (77%) rename
> > > > > > > > > drivers/usb/gadget/{s3c_udc_otg_phy.c =>
> > > > > > > > > dwc2_udc_otg_phy.c} (83%) rename include/usb/s3c_udc.h =>
> > > > > > > > > drivers/usb/gadget/dwc2_udc_otg_priv.h (69%) rename
> > > > > > > > > drivers/usb/gadget/{regs-otg.h => dwc2_udc_otg_regs.h}
> > > > > > > > > (92%) rename drivers/usb/gadget/{s3c_udc_otg_xfer_dma.c
> > > > > > > > > => dwc2_udc_otg_xfer_dma.c} (88%) create mode 100644
> > > > > > > > > include/usb/dwc2_udc.h
> > > > > > > > 
> > > > > > > > What is the base sha1 and branch for those patches?
> > > > > > > > 
> > > > > > > > I cannot apply them on u-boot-usb/master (SHA1:
> > > > > > > > 59a38d86de2439c72d72be54958a04bb1b778410)
> > > > > > > 
> > > > > > > I should've updated u-boot-usb, sorry about that. I can pick
> > > > > > > them through u-boot-usb/master if you don't mind to make
> > > > > > > things easier for you. I put the patches into
> > > > > > > u-boot-usb/s3c-udc for now.
> > > > > > 
> > > > > > Ok, thanks.
> > > > > > 
> > > > > > I will examine that.
> > > > > 
> > > > > OK, shall I wait with application then ?
> > > > 
> > > > Please prepare u-boot-usb/s3c-udc branch.
> > 
> > I've run this patch series through buildman (before running tests):
> > 
> > ./tools/buildman/buildman.py --branch=HEAD samsung --detail --verbose
> > --show_errors --force-build --count=24 --output-dir=./BUILD/
> > 
> > And I've received several errors:
> >        arm:  +   odroid
> > 
> > +../board/samsung/odroid/odroid.c:460:15: error: 'PHY0_SLEEP'
> > 
> >        undeclared here (not in a function)
> > 
> > +  .usb_flags = PHY0_SLEEP,
> > +               ^
> > +make[2]: *** [board/samsung/odroid/odroid.o] Error 1
> > +make[1]: *** [board/samsung/odroid] Error 2
> > +make: *** [sub-make] Error 2
> > 
> > Please fix :-)
> 
> Try the attached fix, if it's OK with you I will wrap it into 04/24 .

I pushed the updated branch to u-boot-usb/s3c-udc , so give it a spin.