[U-Boot] [PATCH] arm: socfpga: Enable ubi and ubifs support

[Marek Vasut <marex@denx.de>]

On Friday, December 11, 2015 at 10:25:59 AM, Chin Liang See wrote:
> Hi Marek,
> 
> On Fri, 2015-12-11 at 17:19 +0800, Chin Liang See wrote:
> > When QSPI and NAND is enabled, the ubi and ubifs support
> > will be enabled too.
> > 
> > Signed-off-by: Chin Liang See <clsee@altera.com>
> > Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> > Cc: Dinh Nguyen <dinh.linux@gmail.com>
> > Cc: Pavel Machek <pavel@denx.de>
> > Cc: Marek Vasut <marex@denx.de>
> > Cc: Stefan Roese <sr@denx.de>
> > ---
> > 
> >  include/configs/socfpga_common.h | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/include/configs/socfpga_common.h
> > b/include/configs/socfpga_common.h
> > index b3f65b6..a07017b 100644
> > --- a/include/configs/socfpga_common.h
> > +++ b/include/configs/socfpga_common.h
> > @@ -274,6 +274,14 @@ unsigned int
> > cm_get_qspi_controller_clk_hz(void);
> > 
> >  #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
> >  #define CONFIG_ENV_SIZE			4096
> > 
> > +/* UBIFS support */
> > +#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND)
> > +#define CONFIG_CMD_UBI
> > +#define CONFIG_CMD_UBIFS
> > +#define CONFIG_RBTREE
> > +#define CONFIG_LZO
> > +#endif
> > +
> 
> I have issue on ubifsmount my ubinized image. I suspect it might
> created wrongly. The code is ok based on previous patches and the one
> you sent to me. Wonder you might able to validate with your working
> ubinized image?

Try applying this patch:

[PATCH] arm: Replace test for CONFIG_ARMV7 with CONFIG_CPU_V7

And then erase the SPI flash, reinstall the ubi image and try again.
Does it help ?

Best regards,
Marek Vasut