[U-Boot] [PATCH 0/5] Add wait_for_bit()

LEMIEUX, SYLVAIN
2015-12-15T18:42:10Z

> From: U-Boot [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Mateusz Kulikowski
> Sent: 14-Dec-15 7:09 PM
> To: u-boot at lists.denx.de; Marek Vasut; Joe Hershberger
> Subject: [U-Boot] [PATCH 0/5] Add wait_for_bit()
>
>
> This series add generic function to poll register waiting for
> one or more bits to change.
>
> Very similar function was used in several drivers:
> - dwc2
> - ohci-lp32xx
> - ehci-mx6
> - zynq_gem
>
> First patch adds function, following patches update drivers and
> board config files / defconfigs.
>
> This series was compile-tested with buildman for ~50 boards
> (most or even all boards affected by change)
>
> Code was also run-tested on ehci-msm driver (not yet in mainline)
>
> There is single difference in behavior: ohci-lp32xx driver will
> not print "Timeout..." message with debug disabled.
> I think it's not a big issue as this driver seems unused, but
> if it's an issue - please drop that patch.

This is not an issue; the lpc32xx driver is used in our custom board based on u-boot 2015.10.

>
>
...
>
> --
> 2.5.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de

________________________________

This e-mail contains privileged and confidential information intended for the use of the addressees named above. If you are not the intended recipient of this e-mail, you are hereby notified that you must not disseminate, copy or take any action in respect of any information contained in it. If you have received this e-mail in error, please notify the sender immediately by e-mail and immediately destroy this e-mail and its attachments.