[U-Boot] [PATCH v2] arm: socfpga: Fix emac1 doesn't work on socdk board

[Marek Vasut <marex@denx.de>]

On Friday, December 18, 2015 at 09:50:09 AM, ?? ? wrote:
> On Dec 18, 2015, at 12:46 AM, Chin Liang See <clsee@altera.com> wrote:
> 
> Hi Shengjiang,
> 
> On Fri, 2015-12-18 at 16:43 +0800, shengjiangwu wrote:
> Updated pinmux group MIXED1IO[0-13] for RGMII1.
> Updated EMAC1 clock.
> 
> Signed-off-by: shengjiangwu <shengjiangwu@icloud.com>
> Cc: Chin Liang See <clsee@altera.com>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Dinh Nguyen <dinh.linux@gmail.com>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Stefan Roese <sr@denx.de>
> ---
> Changes for v2:
> - fixed wrong perpll for emac1
> ---
> board/altera/cyclone5-socdk/qts/pll_config.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/altera/cyclone5-socdk/qts/pll_config.h
> b/board/altera/cyclone5-socdk/qts/pll_config.h
> index eccc705..5b754ac 100644
> --- a/board/altera/cyclone5-socdk/qts/pll_config.h
> +++ b/board/altera/cyclone5-socdk/qts/pll_config.h
> @@ -65,7 +65,7 @@
> #define CONFIG_HPS_CLK_PERVCO_HZ 1000000000
> #define CONFIG_HPS_CLK_SDRVCO_HZ 666666666
> #define CONFIG_HPS_CLK_EMAC0_HZ 250000000
> -#define CONFIG_HPS_CLK_EMAC1_HZ 50000000
> +#define CONFIG_HPS_CLK_EMAC1_HZ 250000000
> 
> 
> This is good. But I believe you miss the pinmux change here. You just
> need to take the previous patch and made the change.
> 
> Thanks
> Chin Liang
> 
> Sorry for not familiar with re-patch process. 

Take a look at 'git rebase -i' and 'git commit --amend' and at the 'tig' command 
and then probably 'patchman' in the U-Boot source tree. These might be helpful.

Best regards,
Marek Vasut