[U-Boot] [PATCH 0/2] Rockchip: USB: added usb phy control to support fastboot

[Marek Vasut <marex@denx.de>]

On Saturday, December 19, 2015 at 11:25:12 PM, Simon Glass wrote:
> Hi Marek,
> 
> On 19 December 2015 at 14:23, Marek Vasut <marex@denx.de> wrote:
> > On Saturday, December 19, 2015 at 09:30:09 PM, Simon Glass wrote:
> >> Hi Frank,
> >> 
> >> On 4 December 2015 at 11:28, Marek Vasut <marex@denx.de> wrote:
> >> > On Friday, December 04, 2015 at 10:36:32 AM, Frank Wang wrote:
> >> >> This series adds support for fastboot related to USB.
> >> >> 
> >> >> [PATCH 1/2] fixed max packet size check error for ep_in in high speed
> >> >> condition
> >> >> 
> >> >> [PATCH 2/2] add usb phy control to support fastboot for rk3036
> >> >> 
> >> >> Tested on RK3036 SDK board, it works Okay.
> >> > 
> >> > I submitted a series [1] about a day ago which renames the s3c driver
> >> > to dwc2. You should update your series based on that. To make things
> >> > easier, just wait a bit until this lands in u-boot-usb .
> >> > 
> >> > Sorry for the hassle.
> >> > 
> >> > [1] http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/243401
> >> 
> >> Are you planning to respin this series? I'd like to apply it for -next.
> > 
> > Are you now picking USB patches too ? ;-) S3C was recently renamed it
> > dwc2, so you might want to respin the series anyway. In this case, it's
> > a simple matter of s/s3c/dwc2/g .
> 
> Not really, it is just that it appeared in my patchwork queue. I'm
> happy for you to pick it up.

Looks like the patchwork distribution doesn't work quite well ;-)
btw. it'd be nice if this was updated to u-boot/master due to the dwc2 change.
I can do it during application, but I cannot test it.

Best regards,
Marek Vasut