From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Tue, 22 Dec 2015 00:13:21 +0100 Subject: [U-Boot] [PATCH] arm: socfpga: Enable ubiload console command In-Reply-To: <1450712174-3262-1-git-send-email-clsee@altera.com> References: <1450712174-3262-1-git-send-email-clsee@altera.com> Message-ID: <201512220013.21473.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday, December 21, 2015 at 04:36:14 PM, Chin Liang See wrote: > Enabling ubiload command to load kernel image and > device tree from mtd part labeled "UBI". ubiload > command will search the file from folder /boot. ... directory ... this is not windows. > Signed-off-by: Chin Liang See > Cc: Dinh Nguyen > Cc: Dinh Nguyen > Cc: Pavel Machek > Cc: Marek Vasut > Cc: Stefan Roese > --- > include/configs/socfpga_cyclone5_socdk.h | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/include/configs/socfpga_cyclone5_socdk.h > b/include/configs/socfpga_cyclone5_socdk.h index 3c2e2ae..21b35d8 100644 > --- a/include/configs/socfpga_cyclone5_socdk.h > +++ b/include/configs/socfpga_cyclone5_socdk.h > @@ -74,7 +74,10 @@ > "qspirootfstype=jffs2\0" \ > "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ > " root=${qspiroot} rw rootfstype=${qspirootfstype};"\ > - "bootm ${loadaddr} - ${fdt_addr}\0" > + "bootm ${loadaddr} - ${fdt_addr}\0" \ > + "ubiload=ubi part UBI; ubifsmount ubi0;" \ > + "ubifsload ${loadaddr} /boot/${bootimage};" \ Use && instead of ;, so the loading won't continue in case of failure. > + "ubifsload ${fdt_addr} /boot/${fdtimage}\0" > > /* The rest of the configuration is shared */ > #include Best regards, Marek Vasut