[U-Boot] [PATCH] arm: socfpga: cyclone5_socdk: Update qspiboot to use UBIFS

[Marek Vasut <marex@denx.de>]

On Monday, December 21, 2015 at 05:08:17 PM, Chin Liang See wrote:
> Update the qspiboot console command to use UBIFS instead
> of old jffs2 file system.
> 
> Signed-off-by: Chin Liang See <clsee@altera.com>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Dinh Nguyen <dinh.linux@gmail.com>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Stefan Roese <sr@denx.de>
> ---
>  include/configs/socfpga_cyclone5_socdk.h | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/include/configs/socfpga_cyclone5_socdk.h
> b/include/configs/socfpga_cyclone5_socdk.h index 61450cb..a0f62ef 100644
> --- a/include/configs/socfpga_cyclone5_socdk.h
> +++ b/include/configs/socfpga_cyclone5_socdk.h
> @@ -71,11 +71,9 @@
>  		"load mmc 0:1 ${loadaddr} ${bootimage};" \
>  		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
>  	"qspiload=sf probe; mtdparts default;run ubiload\0" \
> -	"qspiroot=/dev/mtdblock0\0" \
> -	"qspirootfstype=jffs2\0" \
>  	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
> -		" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
> -		"bootm ${loadaddr} - ${fdt_addr}\0" \
> +		" ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\

Why do you use 1,64 ? Just use /dev/mtdN , no ?

> +		"bootz ${loadaddr} - ${fdt_addr}\0" \
>  	"ubiload=ubi part UBI; ubifsmount ubi0;" \
>  		"ubifsload ${loadaddr} /boot/${bootimage};" \
>  		"ubifsload ${fdt_addr} /boot/${fdtimage}\0"

Best regards,
Marek Vasut