From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2] mx6cuboxi: Make Ethernet functional
Date: Mon, 4 Jan 2016 14:59:24 -0500 [thread overview]
Message-ID: <20160104195924.GL4093@bill-the-cat> (raw)
In-Reply-To: <1451925378-14121-2-git-send-email-festevam@gmail.com>
On Mon, Jan 04, 2016 at 02:36:18PM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
>
> Since commit 59370f3fcd1350 ("net: phy: delay only if reset handler is
> registered") Ethernet is no longer functional:
>
> Booting from net ...
> FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
> BOOTP broadcast 1
> BOOTP broadcast 2
> BOOTP broadcast 3
> BOOTP broadcast 4
>
> This commit does not have an issue in itself, but it revelead a problem
> with the Ethernet initialization.
>
> Configure the AR8035 PHY in the same manner as done in mx6sabresd
> and wandboard, so that we can get a reliable Ethernet operation.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Note:
CPU: Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 14C
Reset cause: POR
Board: MX6 Hummingboard
...
=> setenv autoload no
=> dhcp
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
DHCP client bound to address 192.168.0.219 (7901 ms)
=> tftp ramdisk-pm.gz
Using FEC device
TFTP from server 192.168.0.3; our IP address is 192.168.0.219
Filename 'ramdisk-pm.gz'.
Load address: 0x12000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######
1.4 MiB/s
done
Bytes transferred = 2022580 (1edcb4 hex)
=> crc32 $loadaddr $filesize
CRC32 for 12000000 ... 121edcb3 ==> 775dd44d
=>
CRC32 matches:
$ rhash -C /tftpboot/ramdisk-pm.gz
; Generated by RHash v1.2.8 on 2016-01-04 at 12:04.37
; Written by Aleksey (Akademgorodok) - http://rhash.sourceforge.net/
;
; 2022580 13:41.29 2013-06-25 /tftpboot/ramdisk-pm.gz
/tftpboot/ramdisk-pm.gz 775DD44D
Tested-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160104/60126b60/attachment.sig>
next prev parent reply other threads:[~2016-01-04 19:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-04 16:36 [U-Boot] [PATCH 1/2] mx6cuboxi: Fix the delay for the AR8035 PHY Fabio Estevam
2016-01-04 16:36 ` [U-Boot] [PATCH 2/2] mx6cuboxi: Make Ethernet functional Fabio Estevam
2016-01-04 19:59 ` Tom Rini [this message]
2016-01-04 20:40 ` Troy Kisky
2016-01-04 21:50 ` Fabio Estevam
2016-01-04 22:06 ` Troy Kisky
2016-01-04 22:08 ` Fabio Estevam
2016-01-04 22:10 ` Fabio Estevam
2016-01-04 22:45 ` Troy Kisky
2016-01-04 22:50 ` Fabio Estevam
2016-01-04 23:11 ` Troy Kisky
2016-01-04 23:26 ` Fabio Estevam
2016-01-04 22:30 ` Troy Kisky
2016-01-04 19:59 ` [U-Boot] [PATCH 1/2] mx6cuboxi: Fix the delay for the AR8035 PHY Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160104195924.GL4093@bill-the-cat \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox