From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/4] arm: socfpga: Enable SPL_DM_SEQ_ALIAS for all SOCFPGA configs
Date: Wed, 6 Jan 2016 16:23:43 +0100 [thread overview]
Message-ID: <201601061623.44007.marex@denx.de> (raw)
In-Reply-To: <1452088993-30952-5-git-send-email-nathan@nathanrossi.com>
On Wednesday, January 06, 2016 at 03:03:13 PM, Nathan Rossi wrote:
> This feature is required in SPL to enable support for loading from SPI
> flash.
>
> Also clean up the #define in socfpga_common.h.
>
> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Chin-Liang See <clsee@altera.com>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Stefan Roese <sr@denx.de>
> ---
> v2: Added this patch
> ---
> configs/socfpga_arria5_defconfig | 1 +
> configs/socfpga_cyclone5_defconfig | 1 +
> configs/socfpga_de0_nano_soc_defconfig | 1 +
de0nano board has no SPI flash
> configs/socfpga_mcvevk_defconfig | 1 +
mcvevk board has no SPI flash
> configs/socfpga_sockit_defconfig | 1 +
> configs/socfpga_socrates_defconfig | 1 +
> configs/socfpga_sr1500_defconfig | 1 +
I am not sure about this one, Stefan ?
> include/configs/socfpga_common.h | 1 -
> 8 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/configs/socfpga_arria5_defconfig
> b/configs/socfpga_arria5_defconfig index 68d12df..6e8976f 100644
> --- a/configs/socfpga_arria5_defconfig
> +++ b/configs/socfpga_arria5_defconfig
> @@ -7,6 +7,7 @@ CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK=y
> CONFIG_SPL_STACK_R_ADDR=0x00800000
> CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk"
> CONFIG_SPL=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_SPL_STACK_R=y
> # CONFIG_CMD_IMLS is not set
> # CONFIG_CMD_FLASH is not set
> diff --git a/configs/socfpga_cyclone5_defconfig
> b/configs/socfpga_cyclone5_defconfig index accee92..e31aa71 100644
> --- a/configs/socfpga_cyclone5_defconfig
> +++ b/configs/socfpga_cyclone5_defconfig
> @@ -7,6 +7,7 @@ CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y
> CONFIG_SPL_STACK_R_ADDR=0x00800000
> CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk"
> CONFIG_SPL=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_SPL_STACK_R=y
> # CONFIG_CMD_IMLS is not set
> # CONFIG_CMD_FLASH is not set
> diff --git a/configs/socfpga_de0_nano_soc_defconfig
> b/configs/socfpga_de0_nano_soc_defconfig index 65c1197..3a29238 100644
> --- a/configs/socfpga_de0_nano_soc_defconfig
> +++ b/configs/socfpga_de0_nano_soc_defconfig
> @@ -7,6 +7,7 @@ CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
> CONFIG_SPL_STACK_R_ADDR=0x00800000
> CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
> CONFIG_SPL=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_SPL_STACK_R=y
> # CONFIG_CMD_IMLS is not set
> # CONFIG_CMD_FLASH is not set
> diff --git a/configs/socfpga_mcvevk_defconfig
> b/configs/socfpga_mcvevk_defconfig index c98d4a1..61cee08 100644
> --- a/configs/socfpga_mcvevk_defconfig
> +++ b/configs/socfpga_mcvevk_defconfig
> @@ -7,6 +7,7 @@ CONFIG_TARGET_SOCFPGA_DENX_MCVEVK=y
> CONFIG_SPL_STACK_R_ADDR=0x00800000
> CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_mcvevk"
> CONFIG_SPL=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_SPL_STACK_R=y
> # CONFIG_CMD_IMLS is not set
> # CONFIG_CMD_FLASH is not set
> diff --git a/configs/socfpga_sockit_defconfig
> b/configs/socfpga_sockit_defconfig index b4f41a9..59fbb2c 100644
> --- a/configs/socfpga_sockit_defconfig
> +++ b/configs/socfpga_sockit_defconfig
> @@ -7,6 +7,7 @@ CONFIG_TARGET_SOCFPGA_TERASIC_SOCKIT=y
> CONFIG_SPL_STACK_R_ADDR=0x00800000
> CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sockit"
> CONFIG_SPL=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_SPL_STACK_R=y
> # CONFIG_CMD_IMLS is not set
> # CONFIG_CMD_FLASH is not set
> diff --git a/configs/socfpga_socrates_defconfig
> b/configs/socfpga_socrates_defconfig index fe940f9..aaba8cb 100644
> --- a/configs/socfpga_socrates_defconfig
> +++ b/configs/socfpga_socrates_defconfig
> @@ -7,6 +7,7 @@ CONFIG_TARGET_SOCFPGA_EBV_SOCRATES=y
> CONFIG_SPL_STACK_R_ADDR=0x00800000
> CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates"
> CONFIG_SPL=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_SPL_STACK_R=y
> # CONFIG_CMD_IMLS is not set
> # CONFIG_CMD_FLASH is not set
> diff --git a/configs/socfpga_sr1500_defconfig
> b/configs/socfpga_sr1500_defconfig index 3d98a63..a4f0835 100644
> --- a/configs/socfpga_sr1500_defconfig
> +++ b/configs/socfpga_sr1500_defconfig
> @@ -6,6 +6,7 @@ CONFIG_DM_GPIO=y
> CONFIG_TARGET_SOCFPGA_SR1500=y
> CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sr1500"
> CONFIG_SPL=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SPL_STACK_R_ADDR=0x00800000
> # CONFIG_CMD_IMLS is not set
> diff --git a/include/configs/socfpga_common.h
> b/include/configs/socfpga_common.h index a09e906..8de0ab9 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -370,7 +370,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>
> /* SPL QSPI boot support */
> #ifdef CONFIG_SPL_SPI_SUPPORT
> -#define CONFIG_DM_SEQ_ALIAS 1
> #define CONFIG_SPL_SPI_FLASH_SUPPORT
> #define CONFIG_SPL_SPI_LOAD
> #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
next prev parent reply other threads:[~2016-01-06 15:23 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-06 14:03 [U-Boot] [PATCH v2 0/4] Change DM_SEQ_ALIAS to be configurable for SPL Nathan Rossi
2016-01-06 14:03 ` [U-Boot] [PATCH v2 1/4] spl: dm: Add SPL_DM_SEQ_ALIAS config option Nathan Rossi
2016-01-06 14:03 ` [U-Boot] [PATCH v2 2/4] arm: zynq: Enable SPL_DM_SEQ_ALIAS for all Zynq configs Nathan Rossi
2016-01-06 14:03 ` [U-Boot] [PATCH v2 3/4] arm: mvebu: Select SPL_DM_SEQ_ALIAS Nathan Rossi
2016-01-06 15:32 ` Stefan Roese
2016-01-06 14:03 ` [U-Boot] [PATCH v2 4/4] arm: socfpga: Enable SPL_DM_SEQ_ALIAS for all SOCFPGA configs Nathan Rossi
2016-01-06 15:23 ` Marek Vasut [this message]
2016-01-06 15:32 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201601061623.44007.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox