[U-Boot] [PATCH] arm: socfpga: set the fpga global bit to disable HPS to FPGA signals

[Marek Vasut <marex@denx.de>]

On Thursday, January 07, 2016 at 04:23:09 PM, Dinh Nguyen wrote:
> On 01/07/2016 09:03 AM, Dinh Nguyen wrote:
> > On 01/06/2016 09:20 PM, Marek Vasut wrote:
> >> On Thursday, January 07, 2016 at 03:50:00 AM, Dinh Nguyen wrote:
> >>> On 01/06/2016 08:21 PM, Marek Vasut wrote:
> >>>> On Wednesday, January 06, 2016 at 08:48:43 PM,
> >>>> dinguyen at opensource.altera.com
> >>>> 
> >>>> wrote:
> >>>>> From: Dinh Nguyen <dinh.linux@gmail.com>
> >>>>> 
> >>>>> We should be setting the FPGA Interface Group global bit that will
> >>>>> correctly disable all interfaces between the FPGA and HPS.
> >>>>> 
> >>>>> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> >>>>> ---
> >>>>> 
> >>>>>  drivers/fpga/socfpga.c | 2 +-
> >>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
> >>>>> 
> >>>>> diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga.c
> >>>>> index 4448250..431e159 100644
> >>>>> --- a/drivers/fpga/socfpga.c
> >>>>> +++ b/drivers/fpga/socfpga.c
> >>>>> @@ -269,7 +269,7 @@ int socfpga_load(Altera_desc *desc, const void
> >>>>> *rbf_data, size_t rbf_size) /* Prior programming the FPGA, all
> >>>>> bridges need to be shut off */
> >>>>> 
> >>>>>  	/* Disable all signals from hps peripheral controller to fpga */
> >>>>> 
> >>>>> -	writel(0, &sysmgr_regs->fpgaintfgrp_module);
> >>>>> +	writel(0, &sysmgr_regs->fpgaintfgrp_gbl);
> >>>>> 
> >>>>>  	/* Disable all signals from FPGA to HPS SDRAM */
> >>>>>  
> >>>>>  #define SDR_CTRLGRP_FPGAPORTRST_ADDRESS	0x5080
> >>>> 
> >>>> Looks fine,
> >>>> 
> >>>> Acked-by: Marek Vasut <marex@denx.de>
> >>>> 
> >>>> btw Shouldn't you also fix the same thing in drivers/fpga/socfpga.c ?
> >>>> Even
> >>> 
> >>> I'm confused by what you mean here. The patch is for
> >>> drivers/fpga/socfpga.c.
> >> 
> >> Oops, sorry, there is another one in arch/arm/mach-socfpga/misc.c . I
> >> mispasted the wrong filename.
> > 
> > Ah yes, then we should probably add a function to enable/disable the
> > interfaces.
> 
> But I wonder if I wanted to enable the individual interfaces, i.e. the
> separate EMACs that is in fpgaintfgrp_module, would I need to enable the
> fpgaintfgrp_gbl bit?

Aren't you the one working for Altera? You're the one who should know the best 
:-) But I think this gbl bit is like the top-level killswitch, so you need to
enable this one and only then you can fine-tune config of the subblocks (like
the EMACs etc).

Best regards,
Marek Vasut