From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 05/16] usb: ulpi: Add Kconfig options for ULPI
Date: Thu, 7 Jan 2016 23:50:08 +0100 [thread overview]
Message-ID: <201601072350.08539.marex@denx.de> (raw)
In-Reply-To: <568EE2CB.4080404@gmail.com>
On Thursday, January 07, 2016 at 11:12:27 PM, Mateusz Kulikowski wrote:
> On 06.01.2016 21:49, Marek Vasut wrote:
> > On Wednesday, January 06, 2016 at 07:21:17 PM, Mateusz Kulikowski wrote:
> >> The following options can be now enabled via defconfig:
> >> - CONFIG_USB_ULPI
> >> - CONFIG_USB_ULPI_VIEWPORT
> >> - CONFIG_USB_ULPI_VIEWPORT_OMAP
>
> [...]
>
> >> +++ b/drivers/usb/ulpi/Kconfig
> >> @@ -0,0 +1,10 @@
> >> +comment "ULPI drivers"
> >> +
> >> +config USB_ULPI
> >> + bool
> >> +
> >> +config USB_ULPI_VIEWPORT
> >> + bool
> >> +
> >> +config USB_ULPI_VIEWPORT_OMAP
> >> + bool
> >
> > Description of these options is missing.
>
> My intention here was to keep it away from "users".
>
> This options are not "optional" in any way.
> They are rather like CPU_something or VBAR_something,
> that is - they are required and should be selected by drivers that use
> them, but without this drivers, they are useless.
OK, so they're just options which are selected by drivers. Got it.
All is good from my side then.
> But maybe I'm missing something :)
> If anyone insists on that - I'll make them visible and add description.
>
>
>
> Regards,
> Mateusz
Best regards,
Marek Vasut
next prev parent reply other threads:[~2016-01-07 22:50 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-06 18:21 [U-Boot] [PATCH v1 00/16] Add support for 96boards Dragonboard410C board Mateusz Kulikowski
2016-01-06 18:21 ` [U-Boot] [PATCH v1 01/16] serial: Add support for Qualcomm serial port Mateusz Kulikowski
2016-01-11 16:57 ` Simon Glass
2016-01-06 18:21 ` [U-Boot] [PATCH v1 02/16] gpio: Add support for Qualcomm gpio controller Mateusz Kulikowski
2016-01-11 16:57 ` Simon Glass
2016-01-11 21:27 ` Mateusz Kulikowski
2016-01-06 18:21 ` [U-Boot] [PATCH v1 03/16] mmc: Add support for Qualcomm SDHCI controller Mateusz Kulikowski
2016-01-11 16:57 ` Simon Glass
2016-01-06 18:21 ` [U-Boot] [PATCH v1 04/16] ehci-hcd: Add init_after_reset Mateusz Kulikowski
2016-01-11 16:57 ` Simon Glass
2016-01-06 18:21 ` [U-Boot] [PATCH v1 05/16] usb: ulpi: Add Kconfig options for ULPI Mateusz Kulikowski
2016-01-06 20:49 ` Marek Vasut
2016-01-07 22:12 ` Mateusz Kulikowski
2016-01-07 22:50 ` Marek Vasut [this message]
2016-01-07 23:18 ` Simon Glass
2016-01-11 21:30 ` Mateusz Kulikowski
2016-01-06 18:21 ` [U-Boot] [PATCH v1 06/16] usb: Rename ehci-fsl.h to ehci-ci.h Mateusz Kulikowski
2016-01-06 20:51 ` Marek Vasut
2016-01-06 18:21 ` [U-Boot] [PATCH v1 07/16] usb: ehci-ci: Add missing registers Mateusz Kulikowski
2016-01-06 20:53 ` Marek Vasut
2016-01-06 18:21 ` [U-Boot] [PATCH v1 08/16] ehci-ci.h: drop generic USBCMD fields Mateusz Kulikowski
2016-01-06 20:54 ` Marek Vasut
2016-01-06 18:21 ` [U-Boot] [PATCH v1 09/16] ehci: Add support for Qualcomm EHCI Mateusz Kulikowski
2016-01-06 21:04 ` Marek Vasut
2016-01-11 21:39 ` Mateusz Kulikowski
2016-01-11 22:02 ` Marek Vasut
2016-01-06 18:21 ` [U-Boot] [PATCH v1 10/16] drivers: Add SPMI bus uclass Mateusz Kulikowski
2016-01-11 16:57 ` Simon Glass
2016-01-11 21:41 ` Mateusz Kulikowski
2016-01-06 18:21 ` [U-Boot] [PATCH v1 11/16] spmi: Add sandbox test driver Mateusz Kulikowski
2016-01-11 16:57 ` Simon Glass
2016-01-06 18:21 ` [U-Boot] [PATCH v1 12/16] drivers: spmi: Add support for Qualcomm SPMI bus driver Mateusz Kulikowski
2016-01-11 16:57 ` Simon Glass
2016-01-06 18:21 ` [U-Boot] [PATCH v1 13/16] pmic: Add support for Qualcomm PM8916 PMIC Mateusz Kulikowski
2016-01-11 16:58 ` Simon Glass
2016-01-06 18:21 ` [U-Boot] [PATCH v1 14/16] gpio: Add support for Qualcomm PM8916 gpios Mateusz Kulikowski
2016-01-11 16:58 ` Simon Glass
2016-01-06 18:21 ` [U-Boot] [PATCH v1 15/16] arm: Add support for Qualcomm Snapdragon family Mateusz Kulikowski
2016-01-11 16:58 ` Simon Glass
2016-01-06 18:21 ` [U-Boot] [PATCH v1 16/16] board: Add Qualcomm Dragonboard 410C support Mateusz Kulikowski
2016-01-07 10:23 ` Sjoerd Simons
2016-01-11 21:49 ` Mateusz Kulikowski
2016-01-11 16:58 ` Simon Glass
2016-01-11 22:01 ` Mateusz Kulikowski
2016-01-13 20:32 ` Simon Glass
2016-01-20 21:46 ` Mateusz Kulikowski
2016-01-20 4:35 ` Simon Glass
2016-01-20 22:00 ` Mateusz Kulikowski
2016-01-20 23:49 ` Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201601072350.08539.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox