[U-Boot] Please pull u-boot-rockchip

Peter Robinson
2018-12-04T15:17:15Z

Hi Philipp,

> A summary of improvements and fixes is below.
>
> Thanks,
> Philipp.
>
>
> The following changes since commit 6d4a3ff2649faa2cf2739e332557f256cc34831e:
>
> Merge branch 'master' of git://git.denx.de/u-boot-socfpga (2018-11-29 16:36:53 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-rockchip.git tags/for-master-20181130
>
> for you to fetch changes up to 17e5f3a4265cf372c4e09d7d3fd09fa54ef413cb:
>
> rockchip: rk3188: use board_debug_uart_init() for UART io init (2018-11-30 22:00:11 +0100)
>
> ----------------------------------------------------------------
> Improvements:
> - RK3188 USB-UART functionality
> - errors triggering a hard-stop in SPL on the RK3399 are reported
> - Rockchip RV1108 (SoC) support
> - MicroCrystal RV3029 (RTC) DM driver

Is there a reason why the Rock960/Ficus series [1] wasn't pulled in?
You had said it was high up on your list [2] for this merge window.

Peter

[1] https://lists.denx.de/pipermail/u-boot/2018-September/342174.html
[2] https://lists.denx.de/pipermail/u-boot/2018-October/345806.html

> Fixes:
> - RK3188 early UART setup
> - limit SD-card frequency to 40MHz on the RK3399-Q7
> - MIPI fixes
> - RK3399 CPUB clock initialisation
>
> ----------------------------------------------------------------
> Christoph Muellner (1):
> rockchip: rk3399: Initialize CPU B clock.
>
> Heiko Stuebner (2):
> rockchip: rk3188: add support for usb-uart functionality
> rockchip: rk3188: fix early uart setup
>
> Kever Yang (2):
> rockchip: rock: remove TPL_TINY_MEMSET
> rockchip: rk3188: use board_debug_uart_init() for UART io init
>
> Otavio Salvador (6):
> ARM: rockchip: rv1108: Sync clock with vendor tree
> ARM: rockchip: rv1108: Enable BOUNCE_BUFFER
> ARM: dts: rockchip: Add rv1108 eMMC pinctrl
> ARM: rockchip: rv1108: Add a board_usb_init for USB OTG
> ARM: dts: rockchip: Add rv1108 USB OTG pinctrl
> ARM: rockchip: rv1108: Add support for default distro_bootcmd
>
> Philipp Tomsich (4):
> rockchip: rk3399: spl: always report errors triggering a hard stop
> rockchip: rk3399-puma: reduce sd card max-frequency to 40MHz
> rtc: rv3029: add to Kconfig
> rtc: rv3029: update to support DM and sync with Linux 4.17
>
> Richard RÃ¶jfors (2):
> rockchip: video: mipi: Do not write to the version register
> rockchip: video: mipi: Fix phy frequency setting
>
> arch/arm/dts/rk3399-puma.dtsi | 2 +-
> arch/arm/dts/rv1108.dtsi | 74 +++++++++++++-
> arch/arm/include/asm/arch-rockchip/clock.h | 6 ++
> arch/arm/include/asm/arch-rockchip/cru_rk3399.h | 22 +++-
> arch/arm/include/asm/arch-rockchip/cru_rv1108.h | 144 +++++++++++++++++++++++++-
> arch/arm/include/asm/arch-rockchip/grf_rk3188.h | 42 ++++++++
> arch/arm/mach-rockchip/Kconfig | 9 ++
> arch/arm/mach-rockchip/Makefile | 1 +
> arch/arm/mach-rockchip/rk3188-board-spl.c | 49 +++++++--
> arch/arm/mach-rockchip/rk3399-board-spl.c | 4 +-
> arch/arm/mach-rockchip/rv1108-board.c | 81 +++++++++++++++
> configs/rock_defconfig | 1 -
> drivers/clk/rockchip/clk_rk3399.c | 79 +++++++++++++--
> drivers/clk/rockchip/clk_rv1108.c | 475 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
> drivers/rtc/Kconfig | 10 ++
> drivers/rtc/rv3029.c | 580 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------
> drivers/video/rockchip/rk_mipi.c | 4 +-
> include/configs/evb_rv1108.h | 3 +
> include/configs/rv1108_common.h | 18 ++++
> include/dt-bindings/clock/rv1108-cru.h | 137 ++++++++++++++++++++-----
> scripts/config_whitelist.txt | 1 -
> 21 files changed, 1542 insertions(+), 200 deletions(-)
> create mode 100644 arch/arm/mach-rockchip/rv1108-board.c
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot