From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Sun, 10 Jan 2016 20:06:59 +0100
Subject: [U-Boot] Are non-default configurations expected to work? Re:
	usb: dwc2: does not compile in 2016-rc3 when updating from -rc1.
In-Reply-To: <20160110190406.GG3359@bill-the-cat>
References: <1451970004-2344-1-git-send-email-clsee@altera.com>
 <20160110183929.GA12514@amd> <20160110190406.GG3359@bill-the-cat>
Message-ID: <201601102006.59650.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Sunday, January 10, 2016 at 08:04:06 PM, Tom Rini wrote:
> On Sun, Jan 10, 2016 at 07:39:29PM +0100, Pavel Machek wrote:
> > > > > Pristine u-boot 2016.01-rc4 compiles fine for CV SoCDK. Can you
> > > > > please test mainline _before_ reporting issues ?
> > > > 
> > > > Can you please test mainline before complaining?
> > > 
> > > Yes I _did_ test mainline AND booted it on the actual board. The USB
> > > does work (if you disable dcache, which is unrelated bug). It would be
> > > very nice if you did the same thing before you start yelling on the
> > > list that there is a bug.
> > > 
> > > The config you use and the one produced by make
> > > socfpga_cyclone5_defconfig differ. Use the mainline one, otherwise you
> > > will observe possible problems.
> > 
> > Of course they differ. That's why they are called configuration
> > _options_.
> 
> True.
> 
> > > > With d77a092dd3619ca747fb8290ae8f255e9799aaa6 and attached .config, I
> > > > get the failure. No, CONFIG_DM_USB is not set in the config, which is
> > > > probably the problem.
> > > 
> > > Again, the problem does not happen if you use mainline config. If you
> > > enable random options, you might run into random problems.
> > > 
> > > > Maybe socfpga should select DM_USB or depend on it?
> > > 
> > > u-boot$ git grep DM_USB configs/socfpga_*
> > > configs/socfpga_arria5_defconfig:CONFIG_DM_USB=y
> > > configs/socfpga_cyclone5_defconfig:CONFIG_DM_USB=y
> > > configs/socfpga_de0_nano_soc_defconfig:CONFIG_DM_USB=y
> > > configs/socfpga_mcvevk_defconfig:CONFIG_DM_USB=y
> > > configs/socfpga_sockit_defconfig:CONFIG_DM_USB=y
> > > configs/socfpga_socrates_defconfig:CONFIG_DM_USB=y
> > > 
> > > So your config is broken or outdated, please update your config.
> > 
> > No. Mainline is broken. Yes, it happens to work with defconfig. But it
> > should work with any configuration user can select.
> 
> So, here's the problem.  Disabling CONFIG_DM_USB is not a long term
> solution.

CONFIG_DM_USB is enabled though.

> If there's a problem when CONFIG_DM_USB is not set, it should
> be diagnosed and fixed, especially since we might have a mirror of the
> issue inside the DM code, or it might be a more core problem and we
> simply luck out in the DM case.

The problem is if you have CONFIG_USB enabled, but _without_ CONFIG_DM_USB.
In that case, the DWC2 driver expects you to define a macro which specifies
the base address of the USB controller. Otherwise the driver picks this info 
from the OF.

I believe there is no problem with this, the driver covers both DM and non-DM
operation this way.

Best regards,
Marek Vasut