[U-Boot] FPGA detection failure on Cyclone V soc development kit

[Tom Rini <trini@konsulko.com>]

On Wed, Jan 20, 2016 at 08:31:30PM +0000, M?ns Rullg?rd wrote:

> I'm having a problem with u-boot 2016.01 failing to detect the FPGA on
> my Altera Cyclone V SoC Development Kit.  On startup, it simply prints
> "FPGA: Not Altera chip ID" (the ID having been read as all-zero).  No
> amount of messing with jumpers or switches makes a difference.  The
> software on the SD card included in the box appears to work, so on a
> whim I took the SPL pre-loader from this card and combined it with the
> main 2016.01 u-boot.  This makes the detection succeed, despite Marek
> baulking at this idea.  The "good" SPL identifies as "U-Boot SPL
> 2013.01.01 (Dec 04 2014 - 08:59:41)" which is a different build date
> than the main u-boot on the same SD card, so which source code version
> it was built from is anyone's guess.
> 
> What's interesting is that Marek's board works with u-boot 2016.01 while
> mine fails even with the very same binary.  The boards are different
> revisions (his 100-0321003-C1, mine -E1), and the main Cyclone V chips
> are also different (his 5CSXFC6D6F31C8NES, mine 5CSXFC6D6F31C6N).
> 
> Any suggestions for what to try next?

v2016.01 release or to of tree?  If top of tree, try
http://patchwork.ozlabs.org/patch/570009/

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160121/0d20c8a2/attachment.sig>