[U-Boot] [PATCH 7/7] usb: dwc2: Do not mix data toggle for IN and OUT endpoints, check bounds

[Marek Vasut <marex@denx.de>]

On Friday, January 22, 2016 at 02:30:43 AM, Stefan Br?ns wrote:
> USB protocol allows for 16 IN and 16 OUT endpoints (USB 2.0 Spec,
> 8.3.2.2 Endpoint Field). A function may have an EP 1 for both IN and OUT,
> so these two should be kept separate. As EPs are either BULK or INTERRUPT
> (or ISO), it is fine to have one array per direction for all transfer
> types (also see e236519b7365ef75c5da6a5623f0b03d9c00cfae).
> 
> USB device address is 7 bits, so a bus may have more than 16 devices.
> Check the device number, as the DWC2 driver only supports BULK/ISO for
> the first 16 devices.
> 
> Signed-off-by: Stefan Br?ns <stefan.bruens@rwth-aachen.de>
> ---

Since this is patch 7/7, where are the remaining 6 ?

>  drivers/usb/host/dwc2.c | 29 +++++++++++++++++++----------
>  1 file changed, 19 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
> index 291e4a5..7c107bc 100644
> --- a/drivers/usb/host/dwc2.c
> +++ b/drivers/usb/host/dwc2.c
> @@ -34,7 +34,8 @@ struct dwc2_priv {
>  	uint8_t *aligned_buffer;
>  	uint8_t *status_buffer;
>  #endif
> -	int bulk_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
> +	uint8_t in_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
> +	uint8_t out_data_toggle[MAX_DEVICE][MAX_ENDPOINT];

Use u8/u16/u32 please. All around the place .

>  	struct dwc2_core_regs *regs;
>  	int root_hub_devnum;
>  };

The rest is fine,

Acked-by: Marek Vasut <marex@denx.de>

Thanks!

Best regards,
Marek Vasut