From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Wed, 27 Jan 2016 03:11:34 +0100
Subject: [U-Boot] question regarding USB gadget driver (dwc2)
In-Reply-To: <56A8244E.3090109@broadcom.com>
References: <56A810EB.6010102@broadcom.com> <201601270235.17028.marex@denx.de>
 <56A8244E.3090109@broadcom.com>
Message-ID: <201601270311.34442.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wednesday, January 27, 2016 at 02:58:38 AM, Steve Rae wrote:
> On 16-01-26 05:35 PM, Marek Vasut wrote:
> > On Wednesday, January 27, 2016 at 01:35:55 AM, Steve Rae wrote:
> >> Hi Marek & Lukasz,
> >> 
> >> I have an issue running fastboot on my board (which is USB_SPEED_HIGH):
> >>      => fastboot0
> >>      
> >>      failed to enable in ep
> >>      
> >>      failed to enable in ep
> >>      
> >>      failed to enable in ep
> >> 
> >> Because of this, fastboot does not even initialize properly, and I need
> >> to "^C" to break out?
> >> 
> >> I have traced this the following code in
> > 
> >> "drivers/usb/gadget/dwc2_udc_otg.c":
> > I will have to delegate this onto Lukasz, since he's the s3c gadget
> > expert.
> > 
> > Take a look at:
> > [PATCH 1/2] usb: gadget: s3c_udc_otg: fixed max packet size check for
> > ep_in in high speed
> > 
> > Best regards,
> > Marek Vasut
> 
> yes - I think that 'patchwork.ozlabs.org/patch/560029' would resolve my
> issue

Can you please resubmit that patch if it helps so it finally gets in ?
Thanks

Best regards,
Marek Vasut