From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Wed, 27 Jan 2016 17:14:22 +0100 Subject: [U-Boot] [PATCH 2/5] usb: ehci: Use map_physmem in ehci-generic In-Reply-To: <1453904477.3695.14.camel@synopsys.com> References: <1453860843-5835-1-git-send-email-marex@denx.de> <1453860843-5835-2-git-send-email-marex@denx.de> <1453904477.3695.14.camel@synopsys.com> Message-ID: <201601271714.22544.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wednesday, January 27, 2016 at 03:21:17 PM, Alexey Brodkin wrote: > Hi Marek, Hi, > On Wed, 2016-01-27 at 03:14 +0100, Marek Vasut wrote: > > Some architectures, like MIPS, require remapping of the registers. > > Add the map_physmem() call to handle it. > > > > Signed-off-by: Marek Vasut > > Cc: Daniel Schwierzeck > > Cc: Hans de Goede > > Cc: Masahiro Yamada > > Cc: Alexey Brodkin > > --- > > Probably I'm missing something but I cannot apply it > on top of current master: > ------------------------->8---------------------- > Applying: mips: cache: Bulletproof the code against cornercases > Applying: usb: ehci: Use map_physmem in ehci-generic > error: patch failed: drivers/usb/host/ehci-generic.c:5 > error: drivers/usb/host/ehci-generic.c: patch does not apply > Patch failed at 0002 usb: ehci: Use map_physmem in ehci-generic > The copy of the patch that failed is found in: > /home/abrodkin/Projects/sources/git/u-boot/.git/rebase-apply/patch > When you have resolved this problem, run "git am --continue". > If you prefer to skip this patch, run "git am --skip" instead. > To restore the original branch and stop patching, run "git am --abort" > ------------------------->8---------------------- > > Note I'm applying entire series but not that only patch. Probably because of 4feefdcfe916113ac6e1837ea22857f25fe1771c , that's easy to fix though. Best regards, Marek Vasut