[U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

Wills Wang
2016-01-29T08:46:24Z

On Thursday, January 28, 2016 10:53 PM, Marek Vasut wrote:
> On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote:
>> On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote:
>>> On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:
>>>> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:
>>>>> In order to support boards with ath79 from different vendors and
>>>>> thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
>>>>> and SYS_SOC in the board-level Kconfig. Move these two variables
>>>>> into board-level Kconfig for both ap121 and ap143 boards.
>>>>>
>>>>> Signed-off-by: Marek Vasut <marex@denx.de>
>>>>> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
>>>>> Cc: Wills Wang <wills.wang@live.com>
>>>>> ---
>>>>>
>>>>> arch/mips/mach-ath79/Kconfig | 6 ------
>>>>> board/ath79/ap121/Kconfig | 6 ++++++
>>>>> board/ath79/ap143/Kconfig | 6 ++++++
>>>>> 3 files changed, 12 insertions(+), 6 deletions(-)
>>>>>
>>>>> diff --git a/arch/mips/mach-ath79/Kconfig
>>>>> b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644
>>>>> --- a/arch/mips/mach-ath79/Kconfig
>>>>> +++ b/arch/mips/mach-ath79/Kconfig
>>>>> @@ -1,12 +1,6 @@
>>>>>
>>>>> menu "QCA/Athroes 7xxx/9xxx platforms"
>>>>>
>>>>> depends on ARCH_ATH79
>>>>>
>>>>> -config SYS_VENDOR
>>>>> - default "ath79"
>>>>> -
>>>>> -config SYS_SOC
>>>>> - default "ath79"
>>>>> -
>>>>>
>>>>> config SOC_AR933X
>>>>>
>>>>> bool
>>>>> select SUPPORTS_BIG_ENDIAN
>>>>>
>>>>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
>>>>> index ec72914..a4e5690 100644
>>>>> --- a/board/ath79/ap121/Kconfig
>>>>> +++ b/board/ath79/ap121/Kconfig
>>>>> @@ -1,5 +1,11 @@
>>>>>
>>>>> if BOARD_AP121
>>>>>
>>>>> +config SYS_VENDOR
>>>>> + default "ath79"
>>>>> +
>>>>> +config SYS_SOC
>>>>> + default "ath79"
>>>>> +
>>>>>
>>>>> config SYS_BOARD
>>>>>
>>>>> default "ap121"
>>>>>
>>>>> diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
>>>>> index 118b9b5..2e54fa7 100644
>>>>> --- a/board/ath79/ap143/Kconfig
>>>>> +++ b/board/ath79/ap143/Kconfig
>>>>> @@ -1,5 +1,11 @@
>>>>>
>>>>> if BOARD_AP143
>>>>>
>>>>> +config SYS_VENDOR
>>>>> + default "ath79"
>>>>> +
>>>>> +config SYS_SOC
>>>>> + default "ath79"
>>>>> +
>>>>>
>>>>> config SYS_BOARD
>>>>>
>>>>> default "ap143"
>>>> I plan to place ap121 and ap143 into board/qca, and then
>>>> move these into board directory.
>>> That's fine, but keep this patch or something along those lines, since
>>> I want to create board/arduino/yun/ soon after your stuff is accepted.
>>>
>>> btw. I got both EHCI and ethernet operational, but I am still struggling
>>> with booting the board from the SPI NOR. I think there's something broken
>>> in start.S or lowlevel_init.S . Which board do you use for your
>>> development and testing ?
>> My private board was made by myself, it originate from AP121, and
>> it's circuit is compatible with AP121.
> How do you program your board ? Do you have EJTAG?
>
> What SPI NOR do you use?
My flash chip is W25Q64FV.
I place a chip socket on board, flash chip can be plugged in or out easily.

--
Best Regards
Wills