[U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

Marek Vasut
2016-01-28T13:44:54Z

On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:
> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:
> > In order to support boards with ath79 from different vendors and
> > thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
> > and SYS_SOC in the board-level Kconfig. Move these two variables
> > into board-level Kconfig for both ap121 and ap143 boards.
> >
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
> > Cc: Wills Wang <wills.wang@live.com>
> > ---
> >
> > arch/mips/mach-ath79/Kconfig | 6 ------
> > board/ath79/ap121/Kconfig | 6 ++++++
> > board/ath79/ap143/Kconfig | 6 ++++++
> > 3 files changed, 12 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
> > index 95f7de9..8f07a77 100644
> > --- a/arch/mips/mach-ath79/Kconfig
> > +++ b/arch/mips/mach-ath79/Kconfig
> > @@ -1,12 +1,6 @@
> >
> > menu "QCA/Athroes 7xxx/9xxx platforms"
> >
> > depends on ARCH_ATH79
> >
> > -config SYS_VENDOR
> > - default "ath79"
> > -
> > -config SYS_SOC
> > - default "ath79"
> > -
> >
> > config SOC_AR933X
> >
> > bool
> > select SUPPORTS_BIG_ENDIAN
> >
> > diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
> > index ec72914..a4e5690 100644
> > --- a/board/ath79/ap121/Kconfig
> > +++ b/board/ath79/ap121/Kconfig
> > @@ -1,5 +1,11 @@
> >
> > if BOARD_AP121
> >
> > +config SYS_VENDOR
> > + default "ath79"
> > +
> > +config SYS_SOC
> > + default "ath79"
> > +
> >
> > config SYS_BOARD
> >
> > default "ap121"
> >
> > diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
> > index 118b9b5..2e54fa7 100644
> > --- a/board/ath79/ap143/Kconfig
> > +++ b/board/ath79/ap143/Kconfig
> > @@ -1,5 +1,11 @@
> >
> > if BOARD_AP143
> >
> > +config SYS_VENDOR
> > + default "ath79"
> > +
> > +config SYS_SOC
> > + default "ath79"
> > +
> >
> > config SYS_BOARD
> >
> > default "ap143"
>
> I plan to place ap121 and ap143 into board/qca, and then
> move these into board directory.

That's fine, but keep this patch or something along those lines, since
I want to create board/arduino/yun/ soon after your stuff is accepted.

btw. I got both EHCI and ethernet operational, but I am still struggling
with booting the board from the SPI NOR. I think there's something broken
in start.S or lowlevel_init.S . Which board do you use for your development
and testing ?