From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Thu, 28 Jan 2016 15:53:38 +0100
Subject: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR
	to board Kconfig
In-Reply-To: <BLU436-SMTP2119F190398067B607B5693FFDA0@phx.gbl>
References: <1453938669-7273-1-git-send-email-marex@denx.de>
 <201601281444.54671.marex@denx.de>
 <BLU436-SMTP2119F190398067B607B5693FFDA0@phx.gbl>
Message-ID: <201601281553.38944.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote:
> On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote:
> > On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:
> >> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:
> >>> In order to support boards with ath79 from different vendors and
> >>> thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
> >>> and SYS_SOC in the board-level Kconfig. Move these two variables
> >>> into board-level Kconfig for both ap121 and ap143 boards.
> >>> 
> >>> Signed-off-by: Marek Vasut <marex@denx.de>
> >>> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
> >>> Cc: Wills Wang <wills.wang@live.com>
> >>> ---
> >>> 
> >>>    arch/mips/mach-ath79/Kconfig | 6 ------
> >>>    board/ath79/ap121/Kconfig    | 6 ++++++
> >>>    board/ath79/ap143/Kconfig    | 6 ++++++
> >>>    3 files changed, 12 insertions(+), 6 deletions(-)
> >>> 
> >>> diff --git a/arch/mips/mach-ath79/Kconfig
> >>> b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644
> >>> --- a/arch/mips/mach-ath79/Kconfig
> >>> +++ b/arch/mips/mach-ath79/Kconfig
> >>> @@ -1,12 +1,6 @@
> >>> 
> >>>    menu "QCA/Athroes 7xxx/9xxx platforms"
> >>>    
> >>>    	depends on ARCH_ATH79
> >>> 
> >>> -config SYS_VENDOR
> >>> -	default "ath79"
> >>> -
> >>> -config SYS_SOC
> >>> -	default "ath79"
> >>> -
> >>> 
> >>>    config SOC_AR933X
> >>>    
> >>>    	bool
> >>>    	select SUPPORTS_BIG_ENDIAN
> >>> 
> >>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
> >>> index ec72914..a4e5690 100644
> >>> --- a/board/ath79/ap121/Kconfig
> >>> +++ b/board/ath79/ap121/Kconfig
> >>> @@ -1,5 +1,11 @@
> >>> 
> >>>    if BOARD_AP121
> >>> 
> >>> +config SYS_VENDOR
> >>> +	default "ath79"
> >>> +
> >>> +config SYS_SOC
> >>> +	default "ath79"
> >>> +
> >>> 
> >>>    config SYS_BOARD
> >>>    
> >>>    	default "ap121"
> >>> 
> >>> diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
> >>> index 118b9b5..2e54fa7 100644
> >>> --- a/board/ath79/ap143/Kconfig
> >>> +++ b/board/ath79/ap143/Kconfig
> >>> @@ -1,5 +1,11 @@
> >>> 
> >>>    if BOARD_AP143
> >>> 
> >>> +config SYS_VENDOR
> >>> +	default "ath79"
> >>> +
> >>> +config SYS_SOC
> >>> +	default "ath79"
> >>> +
> >>> 
> >>>    config SYS_BOARD
> >>>    
> >>>    	default "ap143"
> >> 
> >> I plan to place ap121 and ap143 into board/qca, and then
> >> move these into board directory.
> > 
> > That's fine, but keep this patch or something along those lines, since
> > I want to create board/arduino/yun/ soon after your stuff is accepted.
> > 
> > btw. I got both EHCI and ethernet operational, but I am still struggling
> > with booting the board from the SPI NOR. I think there's something broken
> > in start.S or lowlevel_init.S . Which board do you use for your
> > development and testing ?
> 
> My private board was made by myself, it originate from AP121, and
> it's circuit is compatible with AP121.

How do you program your board ? Do you have EJTAG?

What SPI NOR do you use?