From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Fri, 29 Jan 2016 09:50:05 +0100 Subject: [U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig In-Reply-To: References: <1453938669-7273-1-git-send-email-marex@denx.de> <201601281553.38944.marex@denx.de> Message-ID: <201601290950.05393.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Friday, January 29, 2016 at 09:46:24 AM, Wills Wang wrote: > On Thursday, January 28, 2016 10:53 PM, Marek Vasut wrote: > > On Thursday, January 28, 2016 at 03:43:58 PM, Wills Wang wrote: > >> On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote: > >>> On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote: > >>>> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote: > >>>>> In order to support boards with ath79 from different vendors and > >>>>> thus located under /board/$VENDOR/ , we need to define SYS_VENDOR > >>>>> and SYS_SOC in the board-level Kconfig. Move these two variables > >>>>> into board-level Kconfig for both ap121 and ap143 boards. > >>>>> > >>>>> Signed-off-by: Marek Vasut > >>>>> Cc: Daniel Schwierzeck > >>>>> Cc: Wills Wang > >>>>> --- > >>>>> > >>>>> arch/mips/mach-ath79/Kconfig | 6 ------ > >>>>> board/ath79/ap121/Kconfig | 6 ++++++ > >>>>> board/ath79/ap143/Kconfig | 6 ++++++ > >>>>> 3 files changed, 12 insertions(+), 6 deletions(-) > >>>>> > >>>>> diff --git a/arch/mips/mach-ath79/Kconfig > >>>>> b/arch/mips/mach-ath79/Kconfig index 95f7de9..8f07a77 100644 > >>>>> --- a/arch/mips/mach-ath79/Kconfig > >>>>> +++ b/arch/mips/mach-ath79/Kconfig > >>>>> @@ -1,12 +1,6 @@ > >>>>> > >>>>> menu "QCA/Athroes 7xxx/9xxx platforms" > >>>>> > >>>>> depends on ARCH_ATH79 > >>>>> > >>>>> -config SYS_VENDOR > >>>>> - default "ath79" > >>>>> - > >>>>> -config SYS_SOC > >>>>> - default "ath79" > >>>>> - > >>>>> > >>>>> config SOC_AR933X > >>>>> > >>>>> bool > >>>>> select SUPPORTS_BIG_ENDIAN > >>>>> > >>>>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig > >>>>> index ec72914..a4e5690 100644 > >>>>> --- a/board/ath79/ap121/Kconfig > >>>>> +++ b/board/ath79/ap121/Kconfig > >>>>> @@ -1,5 +1,11 @@ > >>>>> > >>>>> if BOARD_AP121 > >>>>> > >>>>> +config SYS_VENDOR > >>>>> + default "ath79" > >>>>> + > >>>>> +config SYS_SOC > >>>>> + default "ath79" > >>>>> + > >>>>> > >>>>> config SYS_BOARD > >>>>> > >>>>> default "ap121" > >>>>> > >>>>> diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig > >>>>> index 118b9b5..2e54fa7 100644 > >>>>> --- a/board/ath79/ap143/Kconfig > >>>>> +++ b/board/ath79/ap143/Kconfig > >>>>> @@ -1,5 +1,11 @@ > >>>>> > >>>>> if BOARD_AP143 > >>>>> > >>>>> +config SYS_VENDOR > >>>>> + default "ath79" > >>>>> + > >>>>> +config SYS_SOC > >>>>> + default "ath79" > >>>>> + > >>>>> > >>>>> config SYS_BOARD > >>>>> > >>>>> default "ap143" > >>>> > >>>> I plan to place ap121 and ap143 into board/qca, and then > >>>> move these into board directory. > >>> > >>> That's fine, but keep this patch or something along those lines, since > >>> I want to create board/arduino/yun/ soon after your stuff is accepted. > >>> > >>> btw. I got both EHCI and ethernet operational, but I am still > >>> struggling with booting the board from the SPI NOR. I think there's > >>> something broken in start.S or lowlevel_init.S . Which board do you > >>> use for your development and testing ? > >> > >> My private board was made by myself, it originate from AP121, and > >> it's circuit is compatible with AP121. > > > > How do you program your board ? Do you have EJTAG? > > > > What SPI NOR do you use? > > My flash chip is W25Q64FV. > I place a chip socket on board, flash chip can be plugged in or out easily. I see, OK. Just out of sheer curiosity, are you doing the ath79 support as a hobby thing or are you putting out an actual product ? Also, you might want to join the u-boot IRC, it's easier to discuss things in real time. Best regards, Marek Vasut