From: Paul Burton <paul.burton@imgtec.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/9] fdt: Support for ISA busses
Date: Fri, 29 Jan 2016 16:04:46 +0000 [thread overview]
Message-ID: <20160129160446.GB3017@NP-P-BURTON> (raw)
In-Reply-To: <CAPnjgZ3SAbFeYDFe=8pEcf4v4UfXOxhfdNe4BUxu9hNp1aFYXA@mail.gmail.com>
On Fri, Jan 29, 2016 at 07:56:11AM -0700, Simon Glass wrote:
> Hi Paul,
>
> On 29 January 2016 at 06:54, Paul Burton <paul.burton@imgtec.com> wrote:
> > Support ISA busses in much the same way as Linux does. This allows for
> > ISA bus addresses to be translated, and only if CONFIG_OF_ISA_BUS is
> > selected in order to avoid including the code in builds which won't need
> > it.
> >
> > Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> > ---
> >
> > common/fdt_support.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++--
> > drivers/core/Kconfig | 4 +++
> > 2 files changed, 85 insertions(+), 2 deletions(-)
> >
> > diff --git a/common/fdt_support.c b/common/fdt_support.c
> > index 75d0858..0aba77d 100644
> > --- a/common/fdt_support.c
> > +++ b/common/fdt_support.c
> > @@ -959,6 +959,7 @@ static void of_dump_addr(const char *s, const fdt32_t *addr, int na) { }
> > struct of_bus {
> > const char *name;
> > const char *addresses;
> > + int (*match)(void *blob, int parentoffset);
>
> Can you please add a comment to this method explaining what it does,
> args, return value?
Hi Simon,
Ok, will do (I'll try not to use "but the rest don't!" as an excuse).
> > void (*count_cells)(void *blob, int parentoffset,
> > int *addrc, int *sizec);
> > u64 (*map)(fdt32_t *addr, const fdt32_t *range,
> > @@ -1013,8 +1014,70 @@ static int of_bus_default_translate(fdt32_t *addr, u64 offset, int na)
> > return 0;
> > }
> >
> > +#ifdef CONFIG_OF_ISA_BUS
> > +
> > +/* ISA bus translator */
> > +static int of_bus_isa_match(void *blob, int parentoffset)
> > +{
> > + const char *name;
> > +
> > + name = fdt_get_name(blob, parentoffset, NULL);
> > + if (!name)
> > + return 0;
> > +
> > + return !strcmp(name, "isa");
> > +}
> > +
> > +static void of_bus_isa_count_cells(void *blob, int parentoffset,
> > + int *addrc, int *sizec)
> > +{
> > + if (addrc)
> > + *addrc = 2;
> > + if (sizec)
> > + *sizec = 1;
> > +}
> > +
> > +static u64 of_bus_isa_map(fdt32_t *addr, const fdt32_t *range,
> > + int na, int ns, int pna)
> > +{
> > + u64 cp, s, da;
> > +
> > + /* Check address type match */
> > + if ((addr[0] ^ range[0]) & cpu_to_be32(1))
> > + return OF_BAD_ADDR;
> > +
> > + cp = of_read_number(range + 1, na - 1);
> > + s = of_read_number(range + na + pna, ns);
> > + da = of_read_number(addr + 1, na - 1);
> > +
> > + debug("OF: ISA map, cp=%" PRIu64 ", s=%" PRIu64
> > + ", da=%" PRIu64 "\n", cp, s, da);
> > +
> > + if (da < cp || da >= (cp + s))
> > + return OF_BAD_ADDR;
> > + return da - cp;
> > +}
> > +
> > +static int of_bus_isa_translate(fdt32_t *addr, u64 offset, int na)
> > +{
> > + return of_bus_default_translate(addr + 1, offset, na - 1);
> > +}
> > +
> > +#endif /* CONFIG_OF_ISA_BUS */
> > +
> > /* Array of bus specific translators */
> > static struct of_bus of_busses[] = {
> > +#ifdef CONFIG_OF_ISA_BUS
> > + /* ISA */
> > + {
> > + .name = "isa",
> > + .addresses = "reg",
> > + .match = of_bus_isa_match,
> > + .count_cells = of_bus_isa_count_cells,
> > + .map = of_bus_isa_map,
> > + .translate = of_bus_isa_translate,
> > + },
> > +#endif /* CONFIG_OF_ISA_BUS */
> > /* Default */
> > {
> > .name = "default",
> > @@ -1025,6 +1088,22 @@ static struct of_bus of_busses[] = {
> > },
> > };
> >
> > +static struct of_bus *of_match_bus(void *blob, int parentoffset)
> > +{
> > + struct of_bus *bus;
> > +
> > + if (ARRAY_SIZE(of_busses) == 1)
> > + return &of_busses[0];
> > +
> > + for (bus = &of_busses[0]; bus; bus++) {
> > + if (!bus->match || bus->match(blob, parentoffset))
> > + return bus;
> > + }
> > +
> > + BUG();
>
> What will this do? Can we propagate the error up instead?
It would mean we'd somehow not got the default bus struct (which has a
NULL bus->match) in the of_busses array. That should never happen, hence
if it does something has gone horribly wrong & there's nothing sane the
caller can do about it.
> > + return NULL;
> > +}
> > +
> > static int of_translate_one(void * blob, int parent, struct of_bus *bus,
> > struct of_bus *pbus, fdt32_t *addr,
> > int na, int ns, int pna, const char *rprop)
> > @@ -1104,7 +1183,7 @@ static u64 __of_translate_address(void *blob, int node_offset, const fdt32_t *in
> > parent = fdt_parent_offset(blob, node_offset);
> > if (parent < 0)
> > goto bail;
> > - bus = &of_busses[0];
> > + bus = of_match_bus(blob, parent);
> >
> > /* Cound address cells & copy address locally */
> > bus->count_cells(blob, parent, &na, &ns);
> > @@ -1133,7 +1212,7 @@ static u64 __of_translate_address(void *blob, int node_offset, const fdt32_t *in
> > }
> >
> > /* Get new parent bus and counts */
> > - pbus = &of_busses[0];
> > + pbus = of_match_bus(blob, parent);
> > pbus->count_cells(blob, parent, &pna, &pns);
> > if (!OF_CHECK_COUNTS(pna)) {
> > printf("%s: Bad cell count for %s\n", __FUNCTION__,
> > diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
> > index c5c9d2a..339f52f 100644
> > --- a/drivers/core/Kconfig
> > +++ b/drivers/core/Kconfig
> > @@ -178,4 +178,8 @@ config SPL_OF_TRANSLATE
> > used for the address translation. This function is faster and
> > smaller in size than fdt_translate_address().
> >
> > +config OF_ISA_BUS
> > + bool "Support the ISA bus in fdt_translate_address"
> > + depends on OF_TRANSLATE
>
> Please add help here, perhaps with a small example.
Ok.
Thanks,
Paul
> > +
> > endmenu
> > --
> > 2.7.0
> >
>
> Regards,
> Simon
next prev parent reply other threads:[~2016-01-29 16:04 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-29 13:54 [U-Boot] [PATCH 0/9] Malta UART using device model & device tree Paul Burton
2016-01-29 13:54 ` [U-Boot] [PATCH 1/9] ioport.h: Remove struct resource & co Paul Burton
2016-01-29 14:06 ` Marek Vasut
2016-01-29 15:58 ` Paul Burton
2016-01-29 20:50 ` Marek Vasut
2016-01-29 13:54 ` [U-Boot] [PATCH 2/9] fdt: Support for ISA busses Paul Burton
2016-01-29 14:56 ` Simon Glass
2016-01-29 16:04 ` Paul Burton [this message]
2016-01-29 18:23 ` Simon Glass
2016-01-29 13:54 ` [U-Boot] [PATCH 3/9] fdt: Support providing IORESOURCE_* flags from translation Paul Burton
2016-01-29 14:56 ` Simon Glass
2016-01-29 13:54 ` [U-Boot] [PATCH 4/9] ns16550: Support I/O accessors selected by DT Paul Burton
2016-01-29 14:56 ` Simon Glass
2016-01-29 16:09 ` Paul Burton
2016-01-29 18:23 ` Simon Glass
2016-01-29 13:54 ` [U-Boot] [PATCH 5/9] MIPS: Remove SLOW_DOWN_IO Paul Burton
2016-02-01 21:27 ` Daniel Schwierzeck
2016-01-29 13:54 ` [U-Boot] [PATCH 6/9] MIPS: Support dynamic I/O port base address Paul Burton
2016-02-01 21:27 ` Daniel Schwierzeck
2016-01-29 13:54 ` [U-Boot] [PATCH 7/9] malta: Set I/O port base early Paul Burton
2016-02-01 21:24 ` Daniel Schwierzeck
2016-01-29 13:54 ` [U-Boot] [PATCH 8/9] malta: Use I/O accessors for SuperI/O controller Paul Burton
2016-02-01 21:26 ` Daniel Schwierzeck
2016-01-29 13:54 ` [U-Boot] [PATCH 9/9] malta: Use device model & tree for UART Paul Burton
2016-01-29 14:05 ` [U-Boot] [PATCH 0/9] Malta UART using device model & device tree Marek Vasut
2016-01-29 14:50 ` Daniel Schwierzeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160129160446.GB3017@NP-P-BURTON \
--to=paul.burton@imgtec.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox