From: Peng Fan <van.freenix@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 2/4] common: env_mmc: support loading env from different cards
Date: Wed, 3 Feb 2016 09:01:51 +0800 [thread overview]
Message-ID: <20160203010129.GA9205@linux-7smt.suse> (raw)
In-Reply-To: <56B10781.3080709@denx.de>
Hi Stefano,
On Tue, Feb 02, 2016 at 08:46:09PM +0100, Stefano Babic wrote:
>Hi Peng,
>
>On 17/12/2015 05:43, Peng Fan wrote:
>> Some boards support booting from different SD card slots.
>> For example, mx6dpsabresd board supports booting from SD2,
>> SD3, EMMC4, using different boot switch. And the index
>> numbers are SD2(0), SD3(1), EMMC4(2).
>> But CONFIG_SYS_MMC_ENV_DEV is hardcoded to 1(for SD3), so when
>> booting from SD2(using 0), uboot complains "MMC: no card present",
>> since there is no card in SD3 slot.
>>
>> This patch introduces a weak function which still returns
>> CONFIG_SYS_MMC_ENV_DEV to avoid break other boards. Then
>> different boards can implement mmc_get_env_devno to read
>> env from the correct sd/emmc.
>>
>> Signed-off-by: Peng Fan <peng.fan@nxp.com>
>> Cc: Stefano Babic <sbabic@denx.de>
>> Cc: Simon Glass <sjg@chromium.org>
>> Cc: Tim Harvey <tharvey@gateworks.com>
>> Cc: Hans de Goede <hdegoede@redhat.com>
>> ---
>>
>
>Tom sets this patch as deferred - then applying the rest of the series
>makes no sense. Patchset should be rechecked later after next release.
Could you please check these three patches. I may missed to use V3, but still used V2.
The three patches are new for the env no.
https://patchwork.ozlabs.org/patch/574586/
https://patchwork.ozlabs.org/patch/574587/
https://patchwork.ozlabs.org/patch/574588/
Thanks,
Peng
>
>Best regards,
>Stefano Babic
>> Changes V2:
>> none.
>>
>> common/env_mmc.c | 22 ++++++++++++++--------
>> include/mmc.h | 1 +
>> 2 files changed, 15 insertions(+), 8 deletions(-)
>>
>> diff --git a/common/env_mmc.c b/common/env_mmc.c
>> index 9639822..857e20c 100644
>> --- a/common/env_mmc.c
>> +++ b/common/env_mmc.c
>> @@ -63,6 +63,11 @@ int env_init(void)
>> return 0;
>> }
>>
>> +__weak int mmc_get_env_devno(void)
>> +{
>> + return CONFIG_SYS_MMC_ENV_DEV;
>> +}
>> +
>> #ifdef CONFIG_SYS_MMC_ENV_PART
>> __weak uint mmc_get_env_part(struct mmc *mmc)
>> {
>> @@ -72,7 +77,7 @@ __weak uint mmc_get_env_part(struct mmc *mmc)
>> static int mmc_set_env_part(struct mmc *mmc)
>> {
>> uint part = mmc_get_env_part(mmc);
>> - int dev = CONFIG_SYS_MMC_ENV_DEV;
>> + int dev = mmc_get_env_devno();
>> int ret = 0;
>>
>> #ifdef CONFIG_SPL_BUILD
>> @@ -108,7 +113,7 @@ static const char *init_mmc_for_env(struct mmc *mmc)
>> static void fini_mmc_for_env(struct mmc *mmc)
>> {
>> #ifdef CONFIG_SYS_MMC_ENV_PART
>> - int dev = CONFIG_SYS_MMC_ENV_DEV;
>> + int dev = mmc_get_env_devno();
>>
>> #ifdef CONFIG_SPL_BUILD
>> dev = 0;
>> @@ -127,7 +132,7 @@ static inline int write_env(struct mmc *mmc, unsigned long size,
>> blk_start = ALIGN(offset, mmc->write_bl_len) / mmc->write_bl_len;
>> blk_cnt = ALIGN(size, mmc->write_bl_len) / mmc->write_bl_len;
>>
>> - n = mmc->block_dev.block_write(CONFIG_SYS_MMC_ENV_DEV, blk_start,
>> + n = mmc->block_dev.block_write(mmc_get_env_devno(), blk_start,
>> blk_cnt, (u_char *)buffer);
>>
>> return (n == blk_cnt) ? 0 : -1;
>> @@ -140,7 +145,8 @@ static unsigned char env_flags;
>> int saveenv(void)
>> {
>> ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1);
>> - struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
>> + int mmc_env_devno = mmc_get_env_devno();
>> + struct mmc *mmc = find_mmc_device(mmc_env_devno);
>> u32 offset;
>> int ret, copy = 0;
>> const char *errmsg;
>> @@ -168,7 +174,7 @@ int saveenv(void)
>> }
>>
>> printf("Writing to %sMMC(%d)... ", copy ? "redundant " : "",
>> - CONFIG_SYS_MMC_ENV_DEV);
>> + mmc_env_devno);
>> if (write_env(mmc, CONFIG_ENV_SIZE, offset, (u_char *)env_new)) {
>> puts("failed\n");
>> ret = 1;
>> @@ -192,7 +198,7 @@ static inline int read_env(struct mmc *mmc, unsigned long size,
>> unsigned long offset, const void *buffer)
>> {
>> uint blk_start, blk_cnt, n;
>> - int dev = CONFIG_SYS_MMC_ENV_DEV;
>> + int dev = mmc_get_env_devno();
>>
>> #ifdef CONFIG_SPL_BUILD
>> dev = 0;
>> @@ -216,7 +222,7 @@ void env_relocate_spec(void)
>> int crc1_ok = 0, crc2_ok = 0;
>> env_t *ep;
>> int ret;
>> - int dev = CONFIG_SYS_MMC_ENV_DEV;
>> + int dev = mmc_get_env_devno();
>> const char *errmsg = NULL;
>>
>> ALLOC_CACHE_ALIGN_BUFFER(env_t, tmp_env1, 1);
>> @@ -302,7 +308,7 @@ void env_relocate_spec(void)
>> struct mmc *mmc;
>> u32 offset;
>> int ret;
>> - int dev = CONFIG_SYS_MMC_ENV_DEV;
>> + int dev = mmc_get_env_devno();
>> const char *errmsg;
>>
>> #ifdef CONFIG_SPL_BUILD
>> diff --git a/include/mmc.h b/include/mmc.h
>> index cda9a19..e70aedb 100644
>> --- a/include/mmc.h
>> +++ b/include/mmc.h
>> @@ -475,6 +475,7 @@ void board_mmc_power_init(void);
>> int board_mmc_init(bd_t *bis);
>> int cpu_mmc_init(bd_t *bis);
>> int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
>> +int mmc_get_env_devno(void);
>>
>> struct pci_device_id;
>>
>>
>
>--
>=====================================================================
>DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
>=====================================================================
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>http://lists.denx.de/mailman/listinfo/u-boot
next prev parent reply other threads:[~2016-02-03 1:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 4:43 [U-Boot] [PATCH V2 1/4] imx: mx7dsabresd: move mmc_get_env_devno to soc code Peng Fan
2015-12-17 4:43 ` [U-Boot] [PATCH V2 2/4] common: env_mmc: support loading env from different cards Peng Fan
2016-02-02 19:46 ` Stefano Babic
2016-02-03 1:01 ` Peng Fan [this message]
2016-02-04 9:13 ` Stefano Babic
2015-12-17 4:43 ` [U-Boot] [PATCH V2 3/4] imx: mx6: implement mmc_get_env_devno Peng Fan
2015-12-17 4:43 ` [U-Boot] [PATCH V2 4/4] imx: mx6: implement board_mmc_get_env_devno Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160203010129.GA9205@linux-7smt.suse \
--to=van.freenix@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox