From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris Brezillon Date: Fri, 5 Feb 2016 16:26:14 +0100 Subject: [U-Boot] [PATCH v2 1/3] imx: mx6quq7: fix USDHC4 declaration In-Reply-To: <1454685573-6941-1-git-send-email-corjon.j@ecagroup.com> References: <20160205151758.017b1009@bbrezillon> <1454685573-6941-1-git-send-email-corjon.j@ecagroup.com> Message-ID: <20160205162614.26337fcd@bbrezillon> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, 5 Feb 2016 16:19:31 +0100 Julien Corjon wrote: > USDHC2 does not exist on mx6quq7 board, as USDHC4 was already been > declared this is probably a typo. > > Signed-off-by: Julien Corjon For the whole series: Acked-by: Boris Brezillon Thanks, Boris > --- > v1 -> v2 > - Split patch (suggested by Boris) > - Replace spaces with tab (suggested by Boris) > > board/seco/mx6quq7/mx6quq7.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c > index ea1d4b8..3743a9e 100644 > --- a/board/seco/mx6quq7/mx6quq7.c > +++ b/board/seco/mx6quq7/mx6quq7.c > @@ -93,7 +93,7 @@ int board_eth_init(bd_t *bis) > > static struct fsl_esdhc_cfg usdhc_cfg[2] = { > {USDHC3_BASE_ADDR}, > - {USDHC2_BASE_ADDR}, > + {USDHC4_BASE_ADDR}, > }; > > int board_mmc_init(bd_t *bis) -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com