From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Fri, 05 Feb 2016 20:31:55 +0100 Subject: [U-Boot] CONFIG_MODEM_SUPPORT / CONFIG_HWFLOW still in use? In-Reply-To: <56B48085.2050500@elsoft.ch> References: <56B48085.2050500@elsoft.ch> Message-ID: <20160205193155.13F8F384A48@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear David, In message <56B48085.2050500@elsoft.ch> you wrote: > > While trying to convert the serial_s3c24x0.c driver to DM, I noticed > that no offical U-Boot configuration seems to be using the > CONFIG_MODEM_SUPPORT or CONFIG_HWFLOW option. > > Do you know if these two options are still in use somewhere else? Or can > all the references to these options be removed irrevocably? IIRC the modem support was added more than a decade ago for a specific board which has been removed from the tree long ago. I cannot remember that any other user has questions or problems with that code, so probably nobody else ever used it. I think chances are good that you can remove this stuff and nobody would ever notice ;-) Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I am a computer. I am dumber than any human and smarter than any ad- ministrator.