[U-Boot] [PATCH 3/4] spi: omap3: Convert to DM

[Tom Rini <trini@konsulko.com>]

On Sat, Feb 06, 2016 at 11:27:21PM +0100, Christophe Ricard wrote:
> Hi Simon, Tom,
> 
> I assume the approach you are taking is also valuable for the i2c:
> omap24xx patch serie:
> http://lists.denx.de/pipermail/u-boot/2016-January/241676.html
> 
> What are your recommendation about the pending patches ?
> Should i send back only the one not taking care of the DM conversion
> and send another serie later ?
> 
> I have seen some work ongoing on this topic on the u-boot-fdt tree
> on the spl-working branch.
> Is there a more accurate place to follow this work ?

For i2c, aside from needing to defer removing the non-DM code for a
while yet, there were some review comments to address in a v2 or answer
as intentional.  For SPI, it's all looking good and I'm assuming Jagan
will have a SPI PR soon.  Thanks!

> 
> Best Regards
> Christophe
> 
> On 26/01/2016 02:55, Peng Fan wrote:
> >Hi Simon,
> >
> >On Mon, Jan 25, 2016 at 06:11:24PM -0700, Simon Glass wrote:
> >>+Hans
> >>
> >>Hi Tom,
> >>
> >>On 21 January 2016 at 05:24, Tom Rini <trini@konsulko.com> wrote:
> >>>On Wed, Jan 20, 2016 at 07:46:15PM -0700, Simon Glass wrote:
> >>>>+Mugunthan, Tom
> >>>>
> >>>>On 17 January 2016 at 03:56, Christophe Ricard
> >>>><christophe.ricard@gmail.com> wrote:
> >>>>>Convert omap3_spi driver to DM and keep compatibility with previous
> >>>>>mode.
> >>>>>
> >>>>>Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
> >>>>>---
> >>>>>
> >>>>>  drivers/spi/Kconfig     |   6 +
> >>>>>  drivers/spi/omap3_spi.c | 439 ++++++++++++++++++++++++++++++++++++++++++------
> >>>>>  drivers/spi/omap3_spi.h |  14 +-
> >>>>>  3 files changed, 402 insertions(+), 57 deletions(-)
> >>>>This is a pretty painful conversion, with lots of #ifdefs. I think it
> >>>>would be possible to use a common pointer type and reduce this.
> >>>>
> >>>>But perhaps it does not matter - how long must we be in the state of
> >>>>supporting legacy SPI? Can we convert all TI boards to driver model?
> >>>We _really_ need some way to support more than one board per binary
> >>>before we can move everything to DM only.
> >>>
> >>>I think we can kind of do this today if we stick to using platform data
> >>>for everything that's board-specific rather than SoC-defined.  What we
> >>>talked about at ELCE was auto-generating the pdata from the device tree,
> >>>I think.
> >>We discussed this on IRC but since that doesn't exist as far as the
> >>mailing list is concerned...
> >>
> >>The current plan is:
> >>
> >>- Adjust build system to optionally build a u-boot.img in FIT format
> >>that includes the U-Boot binary and >1 device tree files
> >>- Adjust SPL to load this
> >>- Add a way for SPL to determine which device tree to select (by
> >>calling a board-specific function)
> >>- Have SPL pass this selected device tree to U-Boot when it starts
> >Can dtb be sperated from the final u-boot.img, if using SPL?
> >I mean let SPL load the u-boot.img and the dtb to correct DRAM address.
> >And the dtb is shared with linux kernel.
> >
> >Regards,
> >Peng.
> >>Thus we should be able to support more than one board with a single
> >>U-Boot image. Of course this is not a perfect solution (e.g. it is
> >>inefficient since the DTs are likely to be largely the same) but it
> >>should be a good first step.
> >>
> >>I'm going to try this out with sunxi initially and plan to get some
> >>patches out by the end of the week.
> >>
> >>Regards,
> >>Simon
> >>_______________________________________________
> >>U-Boot mailing list
> >>U-Boot at lists.denx.de
> >>http://lists.denx.de/mailman/listinfo/u-boot
> 

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160208/ada06fe0/attachment.sig>