From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Fan Date: Wed, 9 Mar 2016 17:37:28 +0800 Subject: [U-Boot] [PATCH] imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask In-Reply-To: <56DFF13A.3080409@denx.de> References: <1457511228-6716-1-git-send-email-van.freenix@gmail.com> <56DFF13A.3080409@denx.de> Message-ID: <20160309093724.GA28957@linux-7smt.suse> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Stefano, On Wed, Mar 09, 2016 at 10:47:38AM +0100, Stefano Babic wrote: >Hi Peng, Ye, > >On 09/03/2016 09:13, Peng Fan wrote: >> From: Ye Li >> >> Since the MX6UL/SL/SX only has one DDR channel, in CCM_CCDR register >> the bit[17] for mmdc_ch0 is reserved and its proper state should be 1. >> When clear this bit, the periph_clk_sel cannot be set and that >> CDHIPR[periph_clk_sel_busy] handshake never clears. >> >> Signed-off-by: Ye Li >> Signed-off-by: Peng Fan >> --- >> arch/arm/cpu/armv7/mx6/soc.c | 5 ++++- >> 1 file changed, 4 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c >> index 91a3deb..bdd41b0 100644 >> --- a/arch/arm/cpu/armv7/mx6/soc.c >> +++ b/arch/arm/cpu/armv7/mx6/soc.c >> @@ -278,7 +278,10 @@ static void clear_mmdc_ch_mask(void) >> reg = readl(&mxc_ccm->ccdr); >> >> /* Clear MMDC channel mask */ >> - reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK); >> + if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || is_cpu_type(MXC_CPU_MX6SL)) >> + reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK); >> + else >> + reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK); >> writel(reg, &mxc_ccm->ccdr); >> } >> > >Acked-by: Stefano Babic > >This is a fix, and my question to you both: is it enough to merge it >after 2016.03 ? I have not read about big issues due to periph_clk_sel, >and maybe we can postponed it (or I merge directly into -next as several >of you have already proposed). Yeah. It's okay to merge after 2016.03. Regards, Peng. > >Best regards, >Stefano Babic > > > >-- >===================================================================== >DENX Software Engineering GmbH, Managing Director: Wolfgang Denk >HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany >Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de >=====================================================================