From mboxrd@z Thu Jan  1 00:00:00 1970
From: Peng Fan <van.freenix@gmail.com>
Date: Sun, 27 Mar 2016 22:57:37 +0800
Subject: [U-Boot] [PATCH V3] fsl: esdhc: support driver model
In-Reply-To: <56F59BB7.70201@nelint.com>
References: <1458886616-20499-1-git-send-email-van.freenix@gmail.com>
 <56F59BB7.70201@nelint.com>
Message-ID: <20160327145735.GA26070@linux-7smt.suse>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Eric,

On Fri, Mar 25, 2016 at 01:12:39PM -0700, Eric Nelson wrote:
>Hi Peng,
>
>On 03/24/2016 11:16 PM, Peng Fan wrote:
>> Support Driver Model for fsl esdhc driver.
>> 
>> 1. Introduce a new structure struct fsl_esdhc_priv
>> 2. Refactor fsl_esdhc_initialize which is originally used by board code.
>>    - Introduce fsl_esdhc_init to be common usage for DM and non-DM
>>    - Introduce fsl_esdhc_cfg_to_priv to build the bridge for non-DM part.
>>    - The original API for board code is still there, but we use
>>      'fsl_esdhc_cfg_to_priv' and 'fsl_esdhc_init' to serve it.
>> 3. All the functions are changed to use 'struct fsl_esdhc_priv', except
>>    fsl_esdhc_initialize.
>> 4. Since clk driver is not implemented, use mxc_get_clock to geth
>>    the clk and fill 'priv->sdhc_clk'.
>> 
>> Has been tested on i.MX6UL 14X14 EVK board:
>> "
>> =>dm tree
>> ....
>>  simple_bus  [ + ]    |   `-- aips-bus at 02100000
>>   mmc        [ + ]    |       |-- usdhc at 02190000
>>   mmc        [ + ]    |       |-- usdhc at 02194000
>> ....
>> => mmc list
>> FSL_SDHC: 0 (SD) 
>> FSL_SDHC: 1 (SD)
>> "
>> 
>
>After pulling in device tree files from the mainline kernel, I was able
>to test this on a SABRE Lite, so you can add my:
>
>Tested-By: Eric Nelson <eric@nelint.com>

Thanks, Eric.

>
>Is somebody prepping patches to pull in support for i.MX6DQ?

I can not follow you on this? you mean adding dts files for i.MX6DQ or else?

Regards,
Peng

>
>Please advise,
>
>
>Eric