From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Thu, 07 Apr 2016 10:22:53 +0200 Subject: [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig In-Reply-To: <570603D0.6000308@xilinx.com> References: <1459874197-14460-1-git-send-email-semen.protsenko@linaro.org> <20160406155914.118074d7@amdc2363> <57054324.5000309@xilinx.com> <20160407084316.73035939@amdc2363> <570603D0.6000308@xilinx.com> Message-ID: <20160407102253.3dda1ad5@amdc2363> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Michal, > On 7.4.2016 08:43, Lukasz Majewski wrote: > > Hi Michal, > > > >> On 6.4.2016 15:59, Lukasz Majewski wrote: > >>> Hi Semen, > >>> > >>>> > >>>> Hi All, > >>>> > >>>> This patch series move next options to Kconfigs/defconfigs: > >>>> - CONFIG_USB_DWC3* > >>>> - CONFIG_USB_GADGET_VBUS_DRAW > >>>> - CONFIG_USB_GADGET_DUALSPEED (partially, only for DWC3 > >>>> platforms for now) > >>>> - CONFIG_USB_GADGET_DOWNLOAD > >>>> - CONFIG_G_DNL_* > >>>> > >>>> All defconfig files were post-processed via "make savedefconfig" > >>>> rule to keep correct order of options in defconfigs. > >>>> > >>>> The whole series was tested using buildman tool for all arm > >>>> boards. > >>>> > >>> > >>> I've reviewed your work and I don't have any objections. > >>> > >>> Now, I'm trying to setup python test environment (DFU, UMS), so I > >>> cannot thoroughly test it. > >> > >> test/py? > > > > Yes, indeed. > > > > I've some problems with stdin/stdout operation via > > u-boot-test-console script with using cu on my Odroid XU3. > > > > I do perform soft reset on my board (by sending "reset") and > > thereafter it seems like no output from u-boot console is examined > > by pexpect. > > > > I've asked Stephen for sharing his u-boot-test-console file, so he > > pointed me towards his github: > > > > https://github.com/swarren/uboot-test-hooks/blob/master/bin/u-boot-test-console > > > > I hope I will solve this problem today :-). > > I am using kermit. I have seen cu too. With cu I don't see /dev/ttyUSB1 redirected to pexpect. If I might ask - which USB <-> RS232 converter do you use? > I am also running qemu but this should be done on real hw. > > Thanks, > Michal > > > -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group