From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Tue, 19 Apr 2016 13:25:02 +0200 Subject: [U-Boot] [PATCH 2/3] usb: s3c-otg: Fix short packet for request size > ep.maxpacket In-Reply-To: <571606C3.1060503@ti.com> References: <1461050221-9268-1-git-send-email-rogerq@ti.com> <1461050221-9268-3-git-send-email-rogerq@ti.com> <20160419110243.577c277a@amdc2363> <571606C3.1060503@ti.com> Message-ID: <20160419132502.731c563c@amdc2363> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Roger, > Hi Lukasz, > > On 19/04/16 12:02, Lukasz Majewski wrote: > > Hi Roger, > > > >> Request size can be greater than ep.packet and still end in a > >> short packet. We need to tackle this case as end of transfer > >> (if short_not_ok is not set) as indicated in USB 2.0 Specification > >> [1], else we get stuck up on certain protocols like fastboot. > >> > >> [1] - USB2.0 Specification, Section 5.3.2 Pipes > >> > >> Reported-by: Steve Rae > >> Signed-off-by: Roger Quadros > >> Tested-by: Steve Rae > >> --- > >> drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c > >> b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c index bce9c30..a31d875 > >> 100644 --- a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c > >> +++ b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c > >> @@ -229,7 +229,7 @@ static void complete_rx(struct dwc2_udc *dev, > >> u8 ep_num) ROUND(xfer_size, CONFIG_SYS_CACHELINE_SIZE)); > >> > >> req->req.actual += min(xfer_size, req->req.length - > >> req->req.actual); > >> - is_short = (xfer_size < ep->ep.maxpacket); > >> + is_short = xfer_size % ep->ep.maxpacket; > > > > is_short is a flag - so maybe it would be better to write something > > like: > > but it is defined as u32 so I thought it might as well print the > short packet length instead of just 1/0. I mean that it looks strange for me in debug message when one see: "is_short: 8" (as it was shown at Steve's output). > > > > > is_short = !!(xfer_size % ep->ep.maxpacket)) ? > > > > I'm going to test those patches on my boards. I will share the > > results ASAP. > > > >> > >> debug_cond(DEBUG_OUT_EP != 0, > >> "%s: RX DMA done : ep = %d, rx bytes = %d/%d, " > > > > > > > > -- > cheers, > -roger > -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group