From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Tue, 26 Apr 2016 12:04:57 -0400 Subject: [U-Boot] [PATCH v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT In-Reply-To: References: <1461203293-20462-1-git-send-email-festevam@gmail.com> Message-ID: <20160426160457.GT29322@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Apr 26, 2016 at 12:58:05PM -0300, Fabio Estevam wrote: > Tom/Stefano, > > On Wed, Apr 20, 2016 at 10:48 PM, Fabio Estevam wrote: > > From: Fabio Estevam > > > > mx6ul_evk does not come with a eMMC populated, so we should not > > define CONFIG_SUPPORT_EMMC_BOOT as it causes SPL to not be able > > to boot some brands of SD cards, such as SanDisk microSD HC - 8GB: > > > > U-Boot SPL 2016.05-rc1-28384-g108f841 (Apr 19 2016 - 11:19:11) > > Trying to boot from MMC1 > > spl: mmc block read error > > SPL: failed to boot from all boot devices > > ### ERROR ### Please RESET the board ### > > > > When CONFIG_SUPPORT_EMMC_BOOT is defined spl_boot_mode() returns > > MMCSD_MODE_EMMCBOOT, so remove this option to have a reliable boot > > via SD card. > > > > Signed-off-by: Fabio Estevam > > Could this one be applied for 2016.05? Fine with me. Do you want to make a PR or should I take it Stefano, if you have no objections? -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: